Help taking apart the bike

Michabike · 08-28-2021, 04:26 AM

Hi guys I just made the account I have a 2000 and I had a bolt come loose in the engine

. I already removed all the metal shreds in the engine but I think I managed to screw up the crankshaft trying to use a flywheel/magneto rotor puller before I removed the 22mm bolt used to turn the crankshaft. I started dremeling off the nut because I couldn

**jonathan180iq** · 08-28-2021, 11:45 AM

Oh damn. Any more details or pics? Did you damage the little splines or what?

Michabike · 08-30-2021, 05:43 PM

How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there

Stilkikn · 08-30-2021, 10:54 PM

http://www.gz250bike.com/forum/faq.p...b3_attachments

**jonathan180iq** · 08-31-2021, 02:44 PM

Quote:

Originally Posted by Michabike

How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there

Best way to post a pic is to host the image somewhere else (there are tons of free image hosting sites) and then link that photo here in the conversation

Stilkikn · 08-31-2021, 03:45 PM

Test-

Stilkikn · 08-31-2021, 03:52 PM

Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?

**jonathan180iq** · 08-31-2021, 05:52 PM

Quote:

Originally Posted by Stilkikn

Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?

Generally, it saves space on the site and allows for higher quality images to be shared. For most things it's not a big deal. But when you're trying to show someone a metal shaving on an oily part, it can make a big difference.

Stilkikn · 08-31-2021, 08:56 PM

Makes sense, thanks.

08-28-2021, 04:26 AM	#1
Michabike Junior Member Join Date: Aug 2021 Posts: 2	Help taking apart the bike Hi guys I just made the account I have a 2000 and I had a bolt come loose in the engine . I already removed all the metal shreds in the engine but I think I managed to screw up the crankshaft trying to use a flywheel/magneto rotor puller before I removed the 22mm bolt used to turn the crankshaft. I started dremeling off the nut because I couldn Login or Register to Remove Ads
	18

08-30-2021, 05:43 PM	#3
Michabike Junior Member Join Date: Aug 2021 Posts: 2	How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there Login or Register to Remove Ads
	10

08-28-2021, 11:45 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,995	Oh damn. Any more details or pics? Did you damage the little splines or what?
	11

08-30-2021, 10:54 PM	#4
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	http://www.gz250bike.com/forum/faq.p...b3_attachments
	9

08-31-2021, 03:52 PM	#7
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?
	10

08-31-2021, 08:56 PM	#9
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	Makes sense, thanks.
	10