Changing cylinder head

Nathan · 10-07-2017, 05:09 PM

Hello. I can't seem to find anywhere about this topic. I acquired a 2007 gz 250 with droped valve and its a complete basket case, And the head is complete trash. Can I replace it with a 86 or 09 head. Are their any differences thru the years.

Vegas Street Rider · 10-07-2017, 05:55 PM

I would stick with the 09 head. Not sure of anything earlier but 02 through 10 should be good. I would pm spldrt for more information on rebuild, etc. He has done it all in that regard. I know he will give you lots of good advice.

10-07-2017, 05:09 PM	#1
Nathan Junior Member Join Date: Oct 2017 Location: Lewisburg PA Posts: 2	Changing cylinder head Hello. I can't seem to find anywhere about this topic. I acquired a 2007 gz 250 with droped valve and its a complete basket case, And the head is complete trash. Can I replace it with a 86 or 09 head. Are their any differences thru the years. Login or Register to Remove Ads
	0

10-07-2017, 05:55 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	Cylinder Head Work I would stick with the 09 head. Not sure of anything earlier but 02 through 10 should be good. I would pm spldrt for more information on rebuild, etc. He has done it all in that regard. I know he will give you lots of good advice. Last edited by Vegas Street Rider; 10-07-2017 at 06:02 PM. Reason: Additional Informative
	0