08-22-2016, 12:44 AM
|
#1 |
|
Member
Join Date: Apr 2011
Location: anaheim california
Posts: 96
|
how to adjust neutral switch
hi all
i need a little help. i just replaced the front sprocket and now i can't find nuetral.. i can find it but the light doesn't come on. sometimes i can get the light to come on if i play with it for a while...i looked in the service manual and unless i missed it. it doesn't tell me how to adjust it ......i know i will have to take the sprocket back off to fool with it, but how to adjust it is another story.... an and all help would be greatl;y appreciated.. greg Login or Register to Remove Ads |
|
|
|
09-08-2016, 06:06 AM
|
#2 |
|
Senior Member
Join Date: Mar 2010
Location: ray city, ga
Posts: 121
|
I don't think that there is any adjustment of that switch.
|
|
|
|
|
09-09-2016, 02:42 AM
|
#3 |
|
Senior Member
Join Date: Jan 2010
Location: San Fernando Valley, CA
Posts: 135
|
There is a spring in there and I am wondering if anybody has pics of what it's supposed to look like? My neighbor was helping me diagnose an electrical issue and he removed and replaced the neutral switch. When I stored the bike in the garage, there was an oil puddle right under the neutral switch. Could just be the o-ring, but I want to make sure it was put back correctly. The pics in the service manual are not very clear and don't show how it's supposed to look with the spring and contact installed.
Login or Register to Remove Ads |
|
|
|
 |
|
|
Linear Mode
