01-03-2012, 07:04 PM | #1 |
Junior Member
Join Date: Jan 2012
Location: ireland
Posts: 8
|
help....
hi everyone. fairly new to this biking game, bought a 2001 gz250 bout 3 months ago. was having a lot of problems with the engine running too high and not idling at steady pace. a few friends told me the carb is filthy and needed to be cleaned out. then had a spill a few weeks back. bi.ke was lying on its left side for bout two or three minutes, bent handlebars and fork seals started to leak. sent for repair, the guy in the shop told me he changed out the oil and the plugs, and cleaned the carb. about a week later, say maybe 80km of city riding, the engine starts to splutter and die. restarted after first time and drove another 6km, then died again. got it started but after about1.5km it died again, and wouldnt restart. had to get towed home. have gotten it to startsince but theres a serious lack of power, the engine cuts out after about ten feet, sometimes when i just put it in gear. any ideas where i should start? do you think i should change out the carb, or could this be as a result of the bike being crashed? btw, i have a feeling the mechanic i sent it too is a bit of a cowboy, and im not sure i want to take his word for it, as im kind of getting the impression he can tell im a beginner and is just trying to scam a few quid out of me.
any advice would be greatly appreciated cheers!! Login or Register to Remove Ads |
|
01-03-2012, 07:23 PM | #2 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: help....
Welcome to the forum.It sounds like your mechanic missed some dirt if & when he cleaned the carb.These bikes are notorious for finicky carbs.They are not that hard to clean if you take your time.There is a manual you can download for free to help you.
viewtopic.php?f=3&t=27 :cool: |
|
01-03-2012, 07:44 PM | #3 |
Junior Member
Join Date: Jan 2012
Location: ireland
Posts: 8
|
Re: help....
to be honest, i'd say its more likely an if. theres about 35000 km on the clock, would i be better of just changing the jets, seals etc, or should there still be some life left in the parts?
Login or Register to Remove Ads |
|
01-03-2012, 07:54 PM | #4 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: help....
Quote:
:cool: |
|
|
01-04-2012, 04:46 AM | #5 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: help....
And don't forget, these carbs like a dose of carb cleaner or fuel additive every so often. Don't know what you can get in Ireland, but the Americans get carb cleaner, while I can only get fuel additive. STP products are good, & your local Halfords (do you have those in Ireland, like in England?) should be able to help. :2tup:
__________________
By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads |
|
01-04-2012, 07:19 AM | #6 |
Senior Member
Join Date: Jul 2011
Location: Eatonton, GA
Posts: 237
|
Re: help....
Just going for broke as i saw that no one else mentioned it... did you happen to check the vacuum line that runs from the back of the petcock to the carb for leaks.. if it is that you will be able to put the bike in "prime" and run all over the place! in my case and instance i just needed a hose clamp that i picked up from a local bike repair shop
|
|
01-04-2012, 09:23 AM | #7 |
Member
Join Date: Jul 2011
Location: Boulder City, NV
Posts: 48
|
Re: help....
My Bike did the same thing. I had debris in the tank that kept clogging the Carb. Bike sat too long from the previous owner.
After lots of cleaning and Carb rebuild kit. All is good. **Sent from mobile** |
|
01-04-2012, 09:24 AM | #8 |
Member
Join Date: Jul 2011
Location: Boulder City, NV
Posts: 48
|
Re: help....
Quote:
**Sent from mobile** |
|
01-04-2012, 09:43 AM | #9 |
Senior Member
Join Date: Aug 2011
Posts: 852
|
Re: help....
...
__________________
***Alert - This person is a douche. Use these comments and advice at your own risk*** |
|
01-04-2012, 11:45 AM | #10 | |
Junior Member
Join Date: Jan 2012
Location: ireland
Posts: 8
|
Re: help....
Quote:
|
|
|
|
|