09-08-2009, 02:09 PM
|
#1 |
|
Junior Member
Join Date: Sep 2009
Location: lakeland fl
Posts: 2
|
gz250 front brakes
i am having trouble installing the brakes on my 250. There desn't seem to be enough clearance to put the caliper with the new pads back over the disk. I have depressed the cylinder as far as i can.it is flush with the caliper housing. what am i missing?
Login or Register to Remove Ads |
|
|
|
09-08-2009, 02:25 PM
|
#2 |
|
Senior Member
Join Date: May 2009
Location: elgin,tx
Posts: 907
|
Re: gz250 front brakes
A few things. The piston is still not all the way in, try loosening the bleader and depressing it again. Not the right pads? the pads are not seated properly in the caliper.
__________________
Standing with the PGR until they stand for me. |
|
|
|
|
09-08-2009, 02:29 PM
|
#3 |
|
Senior Member
Join Date: Jan 2009
Location: Louisville, TN
Posts: 1,413
|
Re: gz250 front brakes
Keep working.... they are hard to get seated.
It took me 3 times to see if I was doing something wrong, just hard to fit the first time. Good luck. Jerry
__________________
Jerry Truth is there are lots of great bikes available and not nearly as many good riders out there riding them... "A man's got to know his limitations..." Login or Register to Remove Ads |
|
|
|
|
09-08-2009, 08:03 PM
|
#4 |
|
Senior Member
Join Date: Apr 2009
Location: akron ohio
Posts: 893
|
Re: gz250 front brakes
where did you get the pads, i got some pads for a car at the auto zone once that were so thick there was no way you could fit them on the car, they had a life time warranty, you know why, if you cant ever use them thell never wear out hahahah..
|
|
|
|
|
09-09-2009, 08:42 AM
|
#5 | |
|
Senior Member
Join Date: May 2009
Location: elgin,tx
Posts: 907
|
Re: gz250 front brakes
Quote:
__________________
Standing with the PGR until they stand for me. Login or Register to Remove Ads |
|
|
|
|
 |
|
|
Linear Mode
