Bent Handle Bars....and more..?

Canuck · 02-28-2009, 01:51 PM

Hey everyone,

couple months ago I was downtown dropping some books off at the library... parked close behind a Suzuki Sidekick and when i returned to the bike 10 mins later it was on its left side with a police officer standing next to tell me what happened...

fortunately the only damage was a smashed windshield and some scratches to the trunk and the left mirror.

OR so I thought

After riding the past few months ive felt as if the alignment was off... I checked out the handlebars and I could SWEAR the left side has been bent in even if slightly i can only imagine what else is bent or thrown off....

Now the good things is i am one of the few on this site who seems to have gotten his right side throttle cap bolt inside the handlebars.

SOOO i was thinkin best thing here is to replace the bars and see if the alignment problem is fixed while hitting another bird with the same stone..

Or should i be getting a full out alignment inspection done by me somehow or the expensive mechanics on Van Island..*sigh*

Canuck · 02-28-2009, 01:52 PM

With the bike weight over 300 lbs dry, leaves one to wonder if the extra force of the jeep slamming into my front fork would be enough extra to really bend those handle bars and maybe more..?

just some thoughts..

thanks guys

music man · 02-28-2009, 02:14 PM

I would replace the handlebars if they are in fact bent, because you can buy a set of aftermarket bars cheap, and you need them anyways, and then ride it and see how it feels, and if it is still off, then take it and get it checked out further. Start with the cheap stuff first.

Easy Rider · 02-28-2009, 02:49 PM

Quote:

Originally Posted by music man

Start with the cheap stuff first.

:plus1:

OTOH, a really good, experienced mechanic can probably tell just by looking at it what it needs.
That "look" might be free and it might save you from replacing things that really don't need to be replaced.

If you feel that you can replace the bars yourself......(fishing the wires into the new bars can be tricky), then I'd say go for the new bars. If you don't think you can do it yourself, might as well take it in to start with.

alantf · 02-28-2009, 06:01 PM

Quote:

Originally Posted by Easy Rider

....(fishing the wires into the new bars can be tricky),

What wires?

Water Warrior 2 · 02-28-2009, 08:14 PM

Quote:

Originally Posted by alantf

Quote:

Originally Posted by Easy Rider

....(fishing the wires into the new bars can be tricky),

What wires?

Yah, what wires ??

Easy Rider · 02-28-2009, 11:56 PM

[quote=Water Warrior]

Quote:

Originally Posted by alantf

Quote:

Originally Posted by "Easy Rider":35m6wj93

....(fishing the wires into the new bars can be tricky),

What wires?

Yah, what wires ??[/quote:35m6wj93]

OK...OK...you mean the wires on the cheap little pig run on the OUTSIDE of the bars ???? :oops:

Yep. Sure enough. :retard:

patrick_777 · 03-01-2009, 02:09 PM

:owned: :itsokay:

Easy Rider · 03-01-2009, 08:53 PM

Quote:

Originally Posted by patrick_777

:owned: :itsokay:

:crutches:

I may be down but I ain't out !! :cool:

adrianinflorida · 03-02-2009, 09:56 AM

Hey, Easy came up with a new mod.....I have a new handlebar coming this week, maybe I'll just route everything (Wiring) inside the handlebar, rather than outside. Nah, too much like work. :biggrin: Zip ties are good enough for me. Maybe I'll get some of those neon colored ones to dress up the harness a bit

(Just kidding)

02-28-2009, 01:51 PM	#1
Canuck Senior Member Join Date: Aug 2008 Location: Vancouver Island Posts: 159	Bent Handle Bars....and more..? Hey everyone, couple months ago I was downtown dropping some books off at the library... parked close behind a Suzuki Sidekick and when i returned to the bike 10 mins later it was on its left side with a police officer standing next to tell me what happened... fortunately the only damage was a smashed windshield and some scratches to the trunk and the left mirror. OR so I thought After riding the past few months ive felt as if the alignment was off... I checked out the handlebars and I could SWEAR the left side has been bent in even if slightly i can only imagine what else is bent or thrown off.... Now the good things is i am one of the few on this site who seems to have gotten his right side throttle cap bolt inside the handlebars. SOOO i was thinkin best thing here is to replace the bars and see if the alignment problem is fixed while hitting another bird with the same stone.. Or should i be getting a full out alignment inspection done by me somehow or the expensive mechanics on Van Island..sigh Login or Register to Remove Ads
	0

02-28-2009, 01:52 PM	#2
Canuck Senior Member Join Date: Aug 2008 Location: Vancouver Island Posts: 159	Re: Bent Handle Bars....and more..? With the bike weight over 300 lbs dry, leaves one to wonder if the extra force of the jeep slamming into my front fork would be enough extra to really bend those handle bars and maybe more..? just some thoughts.. thanks guys
	0

02-28-2009, 02:14 PM	#3
music man Senior Member Join Date: Jun 2008 Location: Hot Springs Arkansas Posts: 1,127	Re: Bent Handle Bars....and more..? I would replace the handlebars if they are in fact bent, because you can buy a set of aftermarket bars cheap, and you need them anyways, and then ride it and see how it feels, and if it is still off, then take it and get it checked out further. Start with the cheap stuff first. __________________ "Tell me what kind of wreck you're going to have and I'll tell you what type of helmet you need." [Author Unknown] Login or Register to Remove Ads
	0

03-01-2009, 02:09 PM	#8
patrick_777 Senior Member Join Date: May 2008 Location: Tulsa, OK Posts: 1,763	Re: Bent Handle Bars....and more..? :owned: :itsokay: __________________ ]I am hiding in Honduras. I am a desperate man. Send lawyers, guns and money. The shit has hit the fan.
	0

03-02-2009, 09:56 AM	#10
adrianinflorida Senior Member Join Date: Feb 2009 Location: Indialantic, Florida Posts: 325	Re: Bent Handle Bars....and more..? Hey, Easy came up with a new mod.....I have a new handlebar coming this week, maybe I'll just route everything (Wiring) inside the handlebar, rather than outside. Nah, too much like work. :biggrin: Zip ties are good enough for me. Maybe I'll get some of those neon colored ones to dress up the harness a bit (Just kidding)
	0