Starts, but only after I press ignition 20 times

OrlandoBiker · 10-23-2020, 02:48 PM

Hello all. My 2006 GZ has has a weird issue where it starts, but I have to push the ignition switch anywhere from 5 to 30 times before it starts. I just replaced the battery so that's fine. It didn't have this issue before. Also should note, it does click every time I press down on the ignition switch. Can any of you think of why after I switched the battery it takes several attempts to start?

Vegas Street Rider · 10-23-2020, 08:05 PM

When you replaced the battery, did you charge the battery. Just because it is new does not mean the battery is fully charged. Slightly lower voltage can make it hard starting.

BabyGoat · 03-22-2021, 12:28 AM

Mine started doing this recently, too. I cleaned the carb and it sounds better now but didn't help the starting problem. My theory is that it doesn't like starting in the "cold" (I live in LA, so that's like...50 degrees). If the issue goes away as the weather warms up then we'll know she's just being a big baby about it lol.

FOS · 07-13-2021, 06:03 PM

New to the forum and first time posting on any forum. Hope I'm doing this right in the right place.

I've been having this same issue. Just wondering if anyone had figured out what exactly causes this. Any help or reply would be appreciated. Thanks.

alantf · 07-14-2021, 02:25 AM

A bit weird, but I found that when it wouldn't start, If I turned the key off and then back on, it started straight up.

FOS · 08-06-2021, 07:57 PM

I know this post is old but i found something out that could potentially be the cause of the issue of the original poster and what I'm experiencing as well. Having to press the start button several times before it starts if you've got spark and fuel and if all the safety switches are working properly; it could be a starter not engaging all the way or worn parts in a starter clutch. Symptoms i believe would be grinding or metallic noise and no start until hitting ignition several times. Hope this helps and maybe someone could verify my suspicion. Thanks.

10-23-2020, 02:48 PM	#1
OrlandoBiker Junior Member Join Date: Oct 2020 Posts: 1	Starts, but only after I press ignition 20 times Hello all. My 2006 GZ has has a weird issue where it starts, but I have to push the ignition switch anywhere from 5 to 30 times before it starts. I just replaced the battery so that's fine. It didn't have this issue before. Also should note, it does click every time I press down on the ignition switch. Can any of you think of why after I switched the battery it takes several attempts to start? Login or Register to Remove Ads
	0

03-22-2021, 12:28 AM	#3
BabyGoat Junior Member Join Date: Feb 2020 Location: Los Angeles Posts: 4	Mine started doing this recently, too. I cleaned the carb and it sounds better now but didn't help the starting problem. My theory is that it doesn't like starting in the "cold" (I live in LA, so that's like...50 degrees). If the issue goes away as the weather warms up then we'll know she's just being a big baby about it lol. Login or Register to Remove Ads
	0

07-14-2021, 02:25 AM	#5
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	A bit weird, but I found that when it wouldn't start, If I turned the key off and then back on, it started straight up. __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

08-06-2021, 07:57 PM	#6
FOS Junior Member Join Date: Jul 2021 Posts: 2	Starting issue I know this post is old but i found something out that could potentially be the cause of the issue of the original poster and what I'm experiencing as well. Having to press the start button several times before it starts if you've got spark and fuel and if all the safety switches are working properly; it could be a starter not engaging all the way or worn parts in a starter clutch. Symptoms i believe would be grinding or metallic noise and no start until hitting ignition several times. Hope this helps and maybe someone could verify my suspicion. Thanks.
	0

10-23-2020, 08:05 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	When you replaced the battery, did you charge the battery. Just because it is new does not mean the battery is fully charged. Slightly lower voltage can make it hard starting.
	1

07-13-2021, 06:03 PM	#4
FOS Junior Member Join Date: Jul 2021 Posts: 2	New to the forum and first time posting on any forum. Hope I'm doing this right in the right place. I've been having this same issue. Just wondering if anyone had figured out what exactly causes this. Any help or reply would be appreciated. Thanks.
	0