Gz250 Will Not Start With Video - Page 3

blaine · 09-25-2015, 12:12 AM

Quote:

Originally Posted by chandlerbingfl

Can you verify spark? Pull the plug, crank and see if there is a spark.... Does using the choke make any difference? With my bike I can just tell by how things sound when I crank it... Sometimes it'll start without choke, sometimes the choke is necessary...

Just inputting....

chandlerbingfl

His bike starts when he primes it through the air cleaner.

chandlerbingfl · 09-25-2015, 01:03 AM

Quote:

Originally Posted by blaine

His bike starts when he primes it through the air cleaner.

Well, I'm thinking it's a vacuum issue.....unless worst case scenario no compression which would lead to fuel NOT being sucked into the chamber....

You can have air, spark and "fuel" but if compression is missing then fuel won't be drawn in. I believe starting fluid is easier to ignite and since it is more of a gas it is sucked into the cylinder easier....

What does your plug look like?!?!?!

chandlerbingfl

clofan · 09-28-2015, 05:08 PM

You said you reconnected all hoses, but I just want to verify because there is an easy one to miss. It starts on the right side of the carb, travels in between it and the engine, and connects on the back of the petcock. It provides suction to allow the petcock to deliver fuel. This would explain why it works on PRIME but not on ON, as PRIME bypasses the requirement for a vacuum line. Unless I'm misunderstanding and it isn't starting on PRIME.

Although, I don't know why it would die on you at 35mph...! Sounds like fuel starvation either way.

Another user took a picture-- it starts behind the throttle cables:

You should be able to feel either the hose or the empty nipple if you reach behind the petcock!

Mr Horta · 09-30-2015, 10:06 PM

Yep reconnected all the hoses sorry about the late reply changed ignition coil still nothing... I think it has no compression at this point I'm looking more forward to selling it and buying new

Water Warrior 2 · 10-01-2015, 04:00 AM

Just listened to the vid again. It sounds like it has compression as it turns over. I agree it is a fuel or vacuum problem but how did it happen so suddenly?

Mr Horta · 10-03-2015, 05:07 PM

Update bike is running took the peacock off cleaned it and put it back on ran like new again... VERY EXCITED!!!!! Made a short video will update soon!! seems like the petcock was clogged but runs perfect very happy!!!!

blaine · 10-03-2015, 06:25 PM

Quote:

Originally Posted by Mr Horta

Update bike is running took the peacock off cleaned it and put it back on ran like new again... VERY EXCITED!!!!! Made a short video will update soon!! seems like the petcock was clogged but runs perfect very happy!!!!

Good to know.......Now ride!!!

gz4me + · 10-03-2015, 08:04 PM

Happy to hear you got the GZ going. I bet that made you feel good. Enjoy the forum and the GZ.

Water Warrior 2 · 10-04-2015, 05:26 AM

Quote:

Originally Posted by Mr Horta

Update bike is running took the peacock off cleaned it and put it back on ran like new again... VERY EXCITED!!!!! Made a short video will update soon!! seems like the petcock was clogged but runs perfect very happy!!!!

Sounds like you have a tank full of mung or rust. Probably will do it again. Just scoot down to an auto parts store and buy some Seafoam. Add the appropriate amount to a full tank and ride it. Repeat if needed.

Mr Horta · 10-06-2015, 01:59 PM

Quote:

Originally Posted by Water Warrior 2

Sounds like you have a tank full of mung or rust. Probably will do it again. Just scoot down to an auto parts store and buy some Seafoam. Add the appropriate amount to a full tank and ride it. Repeat if needed.

Yep... Went about 50 miles then the issue started over....

09-28-2015, 05:08 PM	#23
clofan Junior Member Join Date: Mar 2014 Posts: 29	You said you reconnected all hoses, but I just want to verify because there is an easy one to miss. It starts on the right side of the carb, travels in between it and the engine, and connects on the back of the petcock. It provides suction to allow the petcock to deliver fuel. This would explain why it works on PRIME but not on ON, as PRIME bypasses the requirement for a vacuum line. Unless I'm misunderstanding and it isn't starting on PRIME. Although, I don't know why it would die on you at 35mph...! Sounds like fuel starvation either way. Another user took a picture-- it starts behind the throttle cables: You should be able to feel either the hose or the empty nipple if you reach behind the petcock! Login or Register to Remove Ads Last edited by clofan; 09-28-2015 at 05:15 PM.
	0

10-01-2015, 04:00 AM	#25
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Just listened to the vid again. It sounds like it has compression as it turns over. I agree it is a fuel or vacuum problem but how did it happen so suddenly? Login or Register to Remove Ads
	0

09-30-2015, 10:06 PM	#24
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	Yep reconnected all the hoses sorry about the late reply changed ignition coil still nothing... I think it has no compression at this point I'm looking more forward to selling it and buying new
	0

10-03-2015, 05:07 PM	#26
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	Update bike is running took the peacock off cleaned it and put it back on ran like new again... VERY EXCITED!!!!! Made a short video will update soon!! seems like the petcock was clogged but runs perfect very happy!!!!
	0

10-03-2015, 08:04 PM	#28
gz4me + Senior Member Join Date: Sep 2013 Location: Santa Maria, California Posts: 234	Happy to hear you got the GZ going. I bet that made you feel good. Enjoy the forum and the GZ.
	0