Clutch release camshaft

Dayrider · 04-10-2015, 11:47 PM

My motorcycle shifts into gear fine but the clutch won't engage the clutch release camshaft has a quarter turn with no resistance back-and-forth

Dayrider · 04-12-2015, 12:56 AM

I opened the clutch case pulled the pressure plate the pushpin out then I turned the clutch release camshaft clockwise and it tightened. I put the push rod , bearings and the pressure plate and adjusted The pushrod screw according to service manual everything seems to be working fine but I can't put the case back together until Tomorrow I need to buy A torque wrench for the pressure plate bolts... Anyone know what may have caused this in the first place ?

Water Warrior 2 · 04-12-2015, 06:10 PM

Sometimes things just get loose. Of course what do I know. The only things I had to adjust on Lynda's bike when she had it were the headlight and chain. I left valve adjustments to some one with better eye sight and experience.

Blue Loktite will keep fasteners in place. Never use the red stuff as it is a permanent formula and just like welding something solid.

04-10-2015, 11:47 PM	#1
Dayrider Junior Member Join Date: Mar 2015 Location: Michigan Posts: 14	Clutch release camshaft My motorcycle shifts into gear fine but the clutch won't engage the clutch release camshaft has a quarter turn with no resistance back-and-forth Login or Register to Remove Ads Last edited by Dayrider; 04-10-2015 at 11:49 PM. Reason: Spelling
	0

04-12-2015, 06:10 PM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Sometimes things just get loose. Of course what do I know. The only things I had to adjust on Lynda's bike when she had it were the headlight and chain. I left valve adjustments to some one with better eye sight and experience. Blue Loktite will keep fasteners in place. Never use the red stuff as it is a permanent formula and just like welding something solid. Login or Register to Remove Ads
	0

04-12-2015, 12:56 AM	#2
Dayrider Junior Member Join Date: Mar 2015 Location: Michigan Posts: 14	I opened the clutch case pulled the pressure plate the pushpin out then I turned the clutch release camshaft clockwise and it tightened. I put the push rod , bearings and the pressure plate and adjusted The pushrod screw according to service manual everything seems to be working fine but I can't put the case back together until Tomorrow I need to buy A torque wrench for the pressure plate bolts... Anyone know what may have caused this in the first place ?
	0