![]() |
![]() |
#202 |
Senior Member
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
|
|
![]() |
![]() |
![]() |
#203 |
Senior Member
Join Date: Aug 2013
Location: Franklin VA
Posts: 174
|
Changed oil and filter on my gz today at 7,500 miles.
Even let out the oil through the side 17mm bolt. Been using Valvaline motorcycle 10w40 oil and glad I know about the cheaper oil filter than the Suzuki brand. Oil was dirty brown, was glad I changed it. It had been about 2,500 miles of me owning and I did an oil change then for my own piece of mind. Cleaned the air filter with compressed air. Started easy quick cleaning the carb. with cleaner: In ON or RES position pull off the vacuum line to petcock. 2. Take off the fuel line from petcock. 3. Let carb. run out of gas while engine is running 4. Fill the fuel line to carb. with carb cleaner and run engine til it dies revving the engine some. 5. repeat once more and hook back up vacuum and fuel line. Rode home after 11pm for 20 miles it was 57F and chilly at 55-61mph with jeans and two long sleeve shirts on and reflective vest. Bike performs better when its warmer outside. On the way to work, after 2pm it was 75F and maintained 61-65mph in 5th. I ride 40 miles a day commuting to work and hit reserve around 178 miles on average. 157miles worst about 53mpg gunning it that tank, best 65mpg keeping 40-45mph and small stretches of 55mph. Greased the chain earlier before work. Bike does run better and healthy sounding but not by much, which is good it wasn't that much worse before.
__________________
2005 GZ 250 10,200 miles Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#204 |
Senior Member
Join Date: Nov 2007
Location: Southern Ohio
Posts: 146
|
bike
My bike ran better after we re-jetted the carb. Stared much easier, smoother, also changed the front sprocket to a 16 tooth. For me those were the best mods on my bike. I might say another mod was re-doing the seat at a local shop,[ money well spent]. After those mods, I just enjoyed the bike. CMS
__________________
You can never have enough motocycles 2017 Yamaha R -3 White 2013 Suzuki GW250 Black FSSNOC # 4953 |
![]() |
![]() |
![]() |
#205 |
Senior Member
Join Date: Dec 2013
Location: manning, sc
Posts: 484
|
Today I started installing fog lights on my bike. I will post some pictures when the job is complete.
__________________
1994 Honda Magna VF750C 1996 Honda Magna VF750C 2001 Suzuki gz250(sold) http://youtu.be/KIS9Hzv--f0 https://youtu.be/fvmTNllcQOQ Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#206 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
|
![]() |
![]() |
![]() |
#207 |
Senior Member
Join Date: Dec 2013
Location: manning, sc
Posts: 484
|
I finished installing the fog lights on my bike. I installed a switch in the left panel cover next to the switch for my LED switch.
__________________
1994 Honda Magna VF750C 1996 Honda Magna VF750C 2001 Suzuki gz250(sold) http://youtu.be/KIS9Hzv--f0 https://youtu.be/fvmTNllcQOQ |
![]() |
![]() |
![]() |
#208 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Yipes, that would draw my attention. Ride on.
|
![]() |
![]() |
![]() |
#209 |
Senior Member
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
|
Today my forks got rebuilt with 15w fork oil and they feel firm and makes Sir Jeffers feel much more nimble.
|
![]() |
![]() |
![]() |
#210 |
Senior Member
Join Date: Jan 2010
Location: San Fernando Valley, CA
Posts: 135
|
Did you do the work yourself Cathy? Think I need to go on the hunt for fork advice here. Today I changed the air filter and tightened the chain (first time for that for me doing myself).
|
![]() |
![]() |
![]() |
|
|