Non bolt on sissy bar

mainlinecoffee · 01-24-2014, 05:54 PM

I was thinking use a bung to go In eather side like frame/sb. I would think lead would be too soft to hold any weight. Was thinking about a couple small L bars and could just cut and bend. Got a shopping list togather think I'm going to try steel first and hit it with a torch. Just re harden it at stress points when it fits.

Water Warrior 2 · 01-24-2014, 11:17 PM

AHHHHH a torch widens the possibilities a whole bunch. Have fun.

01-24-2014, 05:54 PM	#1
mainlinecoffee Senior Member Join Date: Oct 2013 Location: lexington ky Posts: 223	I was thinking use a bung to go In eather side like frame/sb. I would think lead would be too soft to hold any weight. Was thinking about a couple small L bars and could just cut and bend. Got a shopping list togather think I'm going to try steel first and hit it with a torch. Just re harden it at stress points when it fits. Login or Register to Remove Ads
	0

01-24-2014, 11:17 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	AHHHHH a torch widens the possibilities a whole bunch. Have fun.
	0