Camera mount. - Page 3

patrick_777 · 06-27-2011, 10:30 AM

When I was working on non-standard mounting with a normal P&S camera, I taped a cotton ball over the mic so the wind would be cut out. It worked really well.

Water Warrior 2 · 08-05-2011, 02:44 AM

I think I finally did it. A better camera mount that is. Will find out tomorrow when Lynda and I go out to burn some precious fossil fuels on the highway. If it works pics will be forthcoming and maybe a few pics of the mount itself. Don't know why I didn't think of this earlier.

cayuse · 08-05-2011, 02:51 AM

Can't wait to see it, WW. I just got a new Kodak Playsport and I'm trying to figure out how to mount it. The old fork mount transmits too much vibration into the vid. I picked up a couple of suction cups from Princess Auto and will try to fashion a tank mount over the weekend. Good luck, tomorrow!

Water Warrior 2 · 08-05-2011, 02:56 AM

Be sure to put a tether on the camera in case the suction cups let go.

cayuse · 08-05-2011, 03:00 AM

oh yeah, I always have a tether! Even nuts and bolts loosen up, sometimes!

Water Warrior 2 · 08-05-2011, 03:10 AM

Quote:

Originally Posted by cayuse

oh yeah, I always have a tether! Even nuts and bolts loosen up, sometimes!

Blue Loktite is your friend. Also at Princess Auto.

06-27-2011, 10:30 AM	#21
patrick_777 Senior Member Join Date: May 2008 Location: Tulsa, OK Posts: 1,763	Re: Camera mount. When I was working on non-standard mounting with a normal P&S camera, I taped a cotton ball over the mic so the wind would be cut out. It worked really well. __________________ ]I am hiding in Honduras. I am a desperate man. Send lawyers, guns and money. The shit has hit the fan. Login or Register to Remove Ads
	0

08-05-2011, 02:44 AM	#22
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Camera mount. I think I finally did it. A better camera mount that is. Will find out tomorrow when Lynda and I go out to burn some precious fossil fuels on the highway. If it works pics will be forthcoming and maybe a few pics of the mount itself. Don't know why I didn't think of this earlier.
	0

08-05-2011, 02:51 AM	#23
cayuse Senior Member Join Date: May 2010 Location: Abbotsford, BC Posts: 444	Re: Camera mount. Can't wait to see it, WW. I just got a new Kodak Playsport and I'm trying to figure out how to mount it. The old fork mount transmits too much vibration into the vid. I picked up a couple of suction cups from Princess Auto and will try to fashion a tank mount over the weekend. Good luck, tomorrow! __________________ Lovin' every minute of it. 2005 GZ250 (sold after 26000km) 2013 CB500XA Login or Register to Remove Ads
	0

08-05-2011, 02:56 AM	#24
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Camera mount. Be sure to put a tether on the camera in case the suction cups let go.
	0

08-05-2011, 03:00 AM	#25
cayuse Senior Member Join Date: May 2010 Location: Abbotsford, BC Posts: 444	Re: Camera mount. oh yeah, I always have a tether! Even nuts and bolts loosen up, sometimes! __________________ Lovin' every minute of it. 2005 GZ250 (sold after 26000km) 2013 CB500XA Login or Register to Remove Ads
	0