How to Adjust foot brake Pedal

edub · 06-15-2011, 03:14 PM

Hello All, I just purchased my 2001 GZ250 and i love it.. however i have one rather serious complaint.

The rear brake pedal is basically straight up from the right foot peg.. not in front of it like it would be on other bike's i have ridden.. I looked at the mechanisms, and I'm perplexed.

I'm sure there is an easy way to adjust the brake pedal to be more "forward". Any help is appreciated. I can get pics if needed.

Cheers.

blaine · 06-15-2011, 03:31 PM

Quote:

Originally Posted by edub

Hello All, I just purchased my 2001 GZ250 and i love it.. however i have one rather serious complaint.

The rear brake pedal is basically straight up from the right foot peg.. not in front of it like it would be on other bike's i have ridden.. I looked at the mechanisms, and I'm perplexed.

I'm sure there is an easy way to adjust the brake pedal to be more "forward". Any help is appreciated. I can get pics if needed.

Cheers.

Welcome to the forum.There is a bolt under the pedal that adjusts the pedal up & down.After you adjust your pedal you will need to adjust the brake light switch,so the brake light comes on when you first put pressure on the pedal.

:cool:

edub · 06-15-2011, 03:41 PM

Thanks for the reply.. I noted that screw, and also noted that it is doing nothing at all.. I think i may have to adjust the entire cable (back on the brake drum) and move it that way because as you can see in the photo i just added... i think it is WAY out of whack!!

alantf · 06-15-2011, 04:36 PM

First.......check that the plate that holds the bolt (under the pedal) is horizontal. If the bike ever goes down, the FIRST thing that happens is that the brake pedal is forced up, which in turn bends the bracket down so that the bolt doesn't touch the pedal, so the pedal shoots up. If the plate is not horizontal, remove the bolt & locknut & beat the plate level, with a heavy hammer such as a lump hammer. Replace the bolt, adjust it until the pedal is in the required position, then tighten the locknut. Been there, done that.

06-15-2011, 03:14 PM	#1
edub Junior Member Join Date: Jun 2011 Location: Halifax Nova Scotia Posts: 3	How to Adjust foot brake Pedal Hello All, I just purchased my 2001 GZ250 and i love it.. however i have one rather serious complaint. The rear brake pedal is basically straight up from the right foot peg.. not in front of it like it would be on other bike's i have ridden.. I looked at the mechanisms, and I'm perplexed. I'm sure there is an easy way to adjust the brake pedal to be more "forward". Any help is appreciated. I can get pics if needed. Cheers. Login or Register to Remove Ads
	0

06-15-2011, 03:41 PM	#3
edub Junior Member Join Date: Jun 2011 Location: Halifax Nova Scotia Posts: 3	Re: How to Adjust foot brake Pedal Thanks for the reply.. I noted that screw, and also noted that it is doing nothing at all.. I think i may have to adjust the entire cable (back on the brake drum) and move it that way because as you can see in the photo i just added... i think it is WAY out of whack!! Login or Register to Remove Ads
	0

06-15-2011, 04:36 PM	#4
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: How to Adjust foot brake Pedal First.......check that the plate that holds the bolt (under the pedal) is horizontal. If the bike ever goes down, the FIRST thing that happens is that the brake pedal is forced up, which in turn bends the bracket down so that the bolt doesn't touch the pedal, so the pedal shoots up. If the plate is not horizontal, remove the bolt & locknut & beat the plate level, with a heavy hammer such as a lump hammer. Replace the bolt, adjust it until the pedal is in the required position, then tighten the locknut. Been there, done that. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0