Reminder Beep for Turn Signals

[Badbob]

Originally Posted by Easy Rider

The idea is to tap into the bottom of the socket with the signal light in it (pretty easy, I've done that before) and then run a thin speaker wire up to something like my windshield bracket and mount a couple of LEDs high enough that you would notice them even in the daylight. If that works, you wouldn't need buzzers at all. The buzzers can get kind of annoying when you are sitting still. Need 2 LEDs connected with opposite polarity because of Zuki's wierd wiring of the indicator light.

If you put them on the outside edge of the rear view mirror you could see them and so could the guy behind you.

My local Harbor Freight Store has 12v LED strips that might work right out of the box.

This place might have something you can use.
http://www.superbrightleds.com/

[Easy Rider]

Originally Posted by Badbob

If you put them on the outside edge of the rear view mirror you could see them and so could the guy behind you.

My local Harbor Freight Store has 12v LED strips that might work right out of the box.

This place might have something you can use.
http://www.superbrightleds.com/

My initial thought was to keep the wires as short as possible and the lights small but...........

That sounds like a good idea; will have to study on it a bit.

Thanks for the sources for LEDs. Got a HF right here in town.

[primal]

Has anyone seen this?

http://www.jcwhitney.com/autoparts/Prod ... urn+signal