2005 Gz250 - Page 2

blaine · 04-14-2010, 12:19 PM

Ok, sorry,didn't look close enough.

blaine · 04-14-2010, 06:17 PM

Im with 'ALANTF' should be fixed under warranty.If gouged deeply fender should be replaced as any filler put in a plastic fender will 'show thru in a short time.

mole2 · 04-18-2010, 11:22 PM

Quote:

Originally Posted by kraznos

2005 GZ250

I like the chrome door edging....looks good. By the background it looks like the Babylon area?

kraznos · 04-19-2010, 06:45 AM

[q

dannylightning · 04-19-2010, 01:08 PM

Quote:

Originally Posted by music man

Quote:

Originally Posted by Mercutio57

Nice. I wanted to go without the rear seat as well, but when I removed it I found a nasty blemish in the fender underneath. Bummer.

How bad is the blemish, because if it is not super deep, you can use this stuff on it http://www.meguiarsdirect.com/detail/MEG+G17216

I used it on the gas tank of the bike I have now, it had swirl marks on it so bad that it looked like someone polished it with 1000 grit sandpaper or something, and now it is almost completely slick looking again. :2tup:

what is the technique to using that stuff, i have heard you have to be extremely carefull with buffing and rubbing compounds so you don't end up taking off the paint. i have some light swirl marks on my tank i would love to get rid of.

bonehead · 04-19-2010, 02:20 PM

Danny, I have seen a specific swirl remover wax at an auto parts. Old timers set in, can't think of where but it is out there just keep an eye out.

mole2 · 04-20-2010, 03:01 AM

Quote:

Originally Posted by kraznos

Quote:

Originally Posted by mole2

Quote:

Originally Posted by kraznos

2005 GZ250

Did you used to live on Long Island?

For 58 years I did. I worked for LILCo, Keyspan and National Grid. Retired in 2007 and moved to SC in 2009.

GZBrian · 04-20-2010, 06:12 AM

Can you tell me where you get the chrome edge trimming on the faenders and tank??? Not sure if it comes that way from Suzuki or you got it somewhere else. It really makes the fenders stand out from the rest of the bike. I have a black one and would like to see if I could get the same chrome trim you have. Nice picture of your motorcylce, looks great.. Thank you. GZ Brian

kraznos · 04-20-2010, 06:54 AM

G

kraznos · 04-20-2010, 07:02 AM

M

04-14-2010, 12:19 PM	#11
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: 2005 Gz250 Ok, sorry,didn't look close enough. __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads
	0

04-14-2010, 06:17 PM	#12
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: 2005 Gz250 Im with 'ALANTF' should be fixed under warranty.If gouged deeply fender should be replaced as any filler put in a plastic fender will 'show thru in a short time. __________________ If at first you do succeed, try not to look surprised.
	0

04-19-2010, 06:45 AM	#14
kraznos Member Join Date: Mar 2010 Posts: 58	Re: 2005 Gz250 [q
	0

04-19-2010, 02:20 PM	#16
bonehead Senior Member Join Date: May 2009 Location: elgin,tx Posts: 907	Re: 2005 Gz250 Danny, I have seen a specific swirl remover wax at an auto parts. Old timers set in, can't think of where but it is out there just keep an eye out. __________________ Standing with the PGR until they stand for me.
	0

04-20-2010, 06:12 AM	#18
GZBrian Senior Member Join Date: Apr 2010 Location: Indiana Posts: 119	Re: 2005 Gz250 Can you tell me where you get the chrome edge trimming on the faenders and tank??? Not sure if it comes that way from Suzuki or you got it somewhere else. It really makes the fenders stand out from the rest of the bike. I have a black one and would like to see if I could get the same chrome trim you have. Nice picture of your motorcylce, looks great.. Thank you. GZ Brian
	0

04-20-2010, 06:54 AM	#19
kraznos Member Join Date: Mar 2010 Posts: 58	Re: 2005 Gz250 G
	0

04-20-2010, 07:02 AM	#20
kraznos Member Join Date: Mar 2010 Posts: 58	Re: 2005 Gz250 M
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode