GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   GZ250 Media (http://www.gz250bike.com/forum/forumdisplay.php?f=14)
-   -   2005 Gz250 (http://www.gz250bike.com/forum/showthread.php?t=3077)

kraznos 04-13-2010 02:50 PM

2005 Gz250
 
2

JWR 04-13-2010 03:03 PM

Re: 2005 Gz250
 
CLEAN.

Looks good.

Mercutio57 04-13-2010 10:25 PM

Re: 2005 Gz250
 
Nice. I wanted to go without the rear seat as well, but when I removed it I found a nasty blemish in the fender underneath. Bummer.

Mercutio57 04-13-2010 10:27 PM

Re: 2005 Gz250
 
PS: I'm on the island as well-- east end.

blaine 04-13-2010 10:34 PM

Re: 2005 Gz250
 
The blemesh under your seat is likley from a poorly installed set of saddle bags by a previous owner.

music man 04-13-2010 10:34 PM

Re: 2005 Gz250
 
Quote:

Originally Posted by Mercutio57
Nice. I wanted to go without the rear seat as well, but when I removed it I found a nasty blemish in the fender underneath. Bummer.


How bad is the blemish, because if it is not super deep, you can use this stuff on it http://www.meguiarsdirect.com/detail/MEG+G17216


I used it on the gas tank of the bike I have now, it had swirl marks on it so bad that it looked like someone polished it with 1000 grit sandpaper or something, and now it is almost completely slick looking again. :2tup:

Mercutio57 04-14-2010 06:42 AM

Re: 2005 Gz250
 
No previous owner; the bike is brand new. As for fixing it, it needs to be both ground down and filled-- nasty. I'll look into that stuff, thanks.

alantf 04-14-2010 08:43 AM

Re: 2005 Gz250
 
Quote:

Originally Posted by Mercutio57
No previous owner; the bike is brand new. As for fixing it, it needs to be both ground down and filled-- nasty. I'll look into that stuff, thanks.

Brand new? DON'T TOUCH IT! Take it back to the dealer, to get it fixed under warranty!!!!!!!!!!!!!!!!!!!!

blaine 04-14-2010 08:55 AM

Re: 2005 Gz250
 
Your first entry says the bike is a 2005?????

kraznos 04-14-2010 10:05 AM

Re: 2005 Gz250
 
I


All times are GMT -4. The time now is 06:16 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.