Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk

Reply
 
Thread Tools Display Modes
Old 06-29-2009, 02:35 AM   #1
Opa
Junior Member
 
Join Date: Apr 2009
Location: Avondale,Arizona
Posts: 5
HHHEEELLLPPP!!!

Well on the way home from work tonight I hit a sand storm (pre monsoon) and a fliping plastic bag hit my exhaust pipe.
Now I have 2 inches of melted plastic on my chrome. i tried to peel it off but its on there hella good.
Any suggestions on removal withour messing up the chrome??? Thanks, OPA



Login or Register to Remove Ads
Opa is offline  
Reply With Quote
Old 06-29-2009, 03:56 AM   #2
Vinci
Junior Member
 
Join Date: Jun 2009
Location: Alabama
Posts: 10
Re: HHHEEELLLPPP!!!

Yes! Just takes time, I had some..gunk (who knows what it was) on mine when I bought it. I used a cleaner and a razor blade and was very careful got it all off and no scratches! I suggest the cleaner first though..I used a regular Meguiars car cleaner worked great.

Hope this helps
__________________
I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free because I know that I alone am morally responsible for everything I do.
Vinci is offline  
Reply With Quote
Old 06-29-2009, 05:10 AM   #3
alanmcorcoran
Senior Member
 
Join Date: Jul 2008
Location: Anaheim, CA
Posts: 2,926
Re: HHHEEELLLPPP!!!

I got melted bag off of mine with a razor as well, but it DOES scratch. I tried 000 steel wool but it wasn't effective. I also used a lot of Goo gone or something like that. The good gone works on small amounts, but if it's burnt black, it's hard to be patient enough with the slow progress of the solvents. The razor blade is very effective but it will leave small scratches.
__________________
[hr:5yt6ldkq][/hr:5yt6ldkq]
http://alanmarkcorcoran.com Motorcycles, Music, Musings and Moreā€¦



Login or Register to Remove Ads
alanmcorcoran is offline  
Reply With Quote
Old 06-29-2009, 08:40 AM   #4
johnjh2o
Junior Member
 
Join Date: Aug 2008
Location: Florida
Posts: 15
Re: HHHEEELLLPPP!!!

Heat exhaust up and use oven cleaner on it.
johnjh2o is offline  
Reply With Quote
Old 06-29-2009, 10:51 AM   #5
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: HHHEEELLLPPP!!!

Quote:
Originally Posted by johnjh2o
Heat exhaust up and use oven cleaner on it.
+1

Unfortunately not much of anything will actually dissolve the plastic.....now that I said that, acetone might do the trick. It is a major ingredient in nail polish remover. If you have some paint remover you might try that too.

Some have found a popsicle stick (or similar) works good. When you get most of it off, 0000 steel wool will be good for the last little pieces.

If you get down to the point where you are just going to scrape it off, that will probably work better if it has "cooked" for several rides and becomes more like ash than plastic.
__________________
Loud pipes risk rights!



Login or Register to Remove Ads
Easy Rider is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:43 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.