Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 12-17-2016, 11:35 PM   #1
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
Wink Rear tire job.

Old shinko... New shinko...








Login or Register to Remove Ads
spldart is offline  
Reply With Quote
Old 12-17-2016, 11:40 PM   #2
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
Pulll the wheel off the bed leg and used the stump and some jumping up and down to break the bead.
Took a file to the rust that was building up inside the wheel.
Detail/clean the wheel since it's off.
spldart is offline  
Reply With Quote
Old 12-18-2016, 03:05 AM   #3
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
Lookin' good!!!



Login or Register to Remove Ads
Vegas Street Rider is offline  
Reply With Quote
Old 12-19-2016, 04:01 PM   #4
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Looks like you got the most out of the old tire without running it till it became dangerous. How many miles are on the old tire?
Water Warrior 2 is offline  
Reply With Quote
Old 02-15-2017, 10:58 AM   #5
GeeZus
Junior Member
 
Join Date: Feb 2017
Location: appalachia
Posts: 2
just bought some shinkos myself. how hard is it to take tires off of the rims? especially if you don't have a lot of tools or jack stands, etc.



Login or Register to Remove Ads
GeeZus is offline  
Reply With Quote
Old 06-22-2017, 10:14 AM   #6
bwader
Senior Member
 
Join Date: Aug 2013
Location: Franklin VA
Posts: 174
Quote:
Originally Posted by GeeZus View Post
just bought some shinkos myself. how hard is it to take tires off of the rims? especially if you don't have a lot of tools or jack stands, etc.
First time i replaced a tire on a 150cc scooter i had a time doing it. But on a motorcycle or bigger tires its easier.

With just tire levers or pry bars, dish soap, jack and a block.

When you get wheel off bike.
Rear tire remove valve stem release the air and inspect.
Then with any dish soap like Dawn or cheap stuff apply around both sides of tire to the rim. Stand on tire to release bead or use lever tools. You can also use baby powder to lubricate the tire off the rim. I like dish soap since clean up is easy with a hose and dry off with rags.

Use tire levers on one side of tire and then do other side.
Also use something soft to place rims on.
Ive done both my gz tires with dish soap and 14 inch tire levers and body weight.

There are a bunch of videos how.

I like to change tires myself to save on money and trip to a shop and time waiting.

__________________
2005 GZ 250 10,200 miles

Last edited by bwader; 06-22-2017 at 11:02 AM.
bwader is offline  
Reply With Quote
Old 06-22-2017, 08:59 PM   #7
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
Quote:
Originally Posted by Water Warrior 2 View Post
Looks like you got the most out of the old tire without running it till it became dangerous. How many miles are on the old tire?
Missed this question. Bout a year... So 12k miles
spldart is offline  
Reply With Quote
Old 06-24-2017, 06:54 AM   #8
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Quote:
Originally Posted by spldart View Post
Missed this question. Bout a year... So 12k miles
You can increase tire mileage by running a couple pounds pressure above the 2 up pressure that is recommended.
Water Warrior 2 is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.