Help taking apart the bike

Michabike · 08-28-2021, 03:26 AM

Hi guys I just made the account I have a 2000 and I had a bolt come loose in the engine

. I already removed all the metal shreds in the engine but I think I managed to screw up the crankshaft trying to use a flywheel/magneto rotor puller before I removed the 22mm bolt used to turn the crankshaft. I started dremeling off the nut because I couldn

**jonathan180iq** · 08-28-2021, 10:45 AM

Oh damn. Any more details or pics? Did you damage the little splines or what?

Michabike · 08-30-2021, 04:43 PM

How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there

Stilkikn · 08-30-2021, 09:54 PM

http://www.gz250bike.com/forum/faq.p...b3_attachments

**jonathan180iq** · 08-31-2021, 01:44 PM

Quote:

Originally Posted by Michabike

How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there

Best way to post a pic is to host the image somewhere else (there are tons of free image hosting sites) and then link that photo here in the conversation

Stilkikn · 08-31-2021, 02:45 PM

Test-

Stilkikn · 08-31-2021, 02:52 PM

Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?

**jonathan180iq** · 08-31-2021, 04:52 PM

Quote:

Originally Posted by Stilkikn

Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?

Generally, it saves space on the site and allows for higher quality images to be shared. For most things it's not a big deal. But when you're trying to show someone a metal shaving on an oily part, it can make a big difference.

Stilkikn · 08-31-2021, 07:56 PM

Makes sense, thanks.

08-28-2021, 03:26 AM	#1
Michabike Junior Member Join Date: Aug 2021 Posts: 2	Help taking apart the bike Hi guys I just made the account I have a 2000 and I had a bolt come loose in the engine . I already removed all the metal shreds in the engine but I think I managed to screw up the crankshaft trying to use a flywheel/magneto rotor puller before I removed the 22mm bolt used to turn the crankshaft. I started dremeling off the nut because I couldn Login or Register to Remove Ads
	3

08-30-2021, 04:43 PM	#3
Michabike Junior Member Join Date: Aug 2021 Posts: 2	How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there Login or Register to Remove Ads
	1

08-28-2021, 10:45 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Oh damn. Any more details or pics? Did you damage the little splines or what?
	1

08-30-2021, 09:54 PM	#4
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	http://www.gz250bike.com/forum/faq.p...b3_attachments
	0

08-31-2021, 02:52 PM	#7
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?
	1

08-31-2021, 07:56 PM	#9
Stilkikn Junior Member Join Date: Jan 2021 Posts: 17	Makes sense, thanks.
	1