![]() |
#1 |
Junior Member
Join Date: Jun 2016
Posts: 10
|
Best way to clean the chain?
I bought a bike with a VERY dirty chain. After looking at the chain for too long, I did some research and found that the chain does not have a master link.
I would like to know if there is a quick way to remove the chain without having to tear the bike apart. Do I need to buy a chain breaker or is there another option? Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,097
|
Everyone has their own way of doing things so you will get lots of answers. I put my rear tire up in the air and use WD40 and a chain brush moving the chain by turning the rear tire. I then wipe it clean after it has had time to soak in and then use DuPont Multi Lube Teflon spray instead of the traditional chain lube/oil. I have not seen any deterioration of the o-rings and the chain travels very quietly. I now have approximately 12,500 miles on the chain and it looks like new with no appreciable stretching.
|
![]() |
![]() |
![]() |
#3 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Quote:
![]() Login or Register to Remove Ads |
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Oct 2007
Location: HoCo, Maryland
Posts: 1,349
|
Manual says to use kerosene to clean it (I use it with a paint brush), and motor oil to lube (I use heavy gear oil).
Careful with the WD-40, it could deteriorate the o rings. |
![]() |
![]() |
![]() |
#5 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Quote:
![]() Login or Register to Remove Ads |
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Kerosene and a brush here. Wipe clean and dry. Add your fav lube.
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Apr 2016
Location: Illinois
Posts: 174
|
I would be carefull with wax as chain lube. From my long biking experience wax is ineffective. Yes - it keeps chain clean, but unless you lube every ride - it just doesn't stay on - causing quick wear and rust.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
I cleaned & lubed every 1000 Km & chain was still in great shape after 30000 km using PJ1.I found it perfect as it goes on liquid to penetrate & than thicken to stay in place.I also find it a great cable lube.
Last edited by blaine; 08-08-2016 at 08:21 PM. |
![]() |
![]() |
![]() |
#9 | |
Senior Member
Join Date: Apr 2016
Location: Illinois
Posts: 174
|
Quote:
"PJ1 New Improved Black Label Heavy Duty Chain Lube applies easily and penetrates into the pins and rollers to set up into a tacky, grease-like coating. PJ1 Black Label Heavy Duty Chain Lubes resilient coating reduces chain stretching and shock that normally is encountered during off-road racing and riding. Displaces and repels water. Will not harden and crack like wax" My experience with wax lubricants was exactly as described bold above. It was flaking off easily and gone after few miles. Last edited by wacio; 08-09-2016 at 04:34 PM. |
|
![]() |
![]() |
![]() |
#10 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
Tags |
chain, cleaning |
|
|