Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > General > Forum News & Support

Reply
 
Thread Tools Display Modes
Old 08-28-2021, 03:26 AM   #1
Michabike
Junior Member
 
Join Date: Aug 2021
Posts: 2
Thumbs Down Help taking apart the bike

Hi guys I just made the account I have a 2000 and I had a bolt come loose in the engine . I already removed all the metal shreds in the engine but I think I managed to screw up the crankshaft trying to use a flywheel/magneto rotor puller before I removed the 22mm bolt used to turn the crankshaft. I started dremeling off the nut because I couldn



Login or Register to Remove Ads
Michabike is offline  
Reply With Quote
Old 08-28-2021, 10:45 AM   #2
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Oh damn. Any more details or pics? Did you damage the little splines or what?
jonathan180iq is offline  
Reply With Quote
Old 08-30-2021, 04:43 PM   #3
Michabike
Junior Member
 
Join Date: Aug 2021
Posts: 2
How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there



Login or Register to Remove Ads
Michabike is offline  
Reply With Quote
Old 08-30-2021, 09:54 PM   #4
Stilkikn
Junior Member
 
Join Date: Jan 2021
Posts: 17
http://www.gz250bike.com/forum/faq.p...b3_attachments
Stilkikn is offline  
Reply With Quote
Old 08-31-2021, 01:44 PM   #5
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Quote:
Originally Posted by Michabike View Post
How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there
Best way to post a pic is to host the image somewhere else (there are tons of free image hosting sites) and then link that photo here in the conversation



Login or Register to Remove Ads
jonathan180iq is offline  
Reply With Quote
Old 08-31-2021, 02:45 PM   #6
Stilkikn
Junior Member
 
Join Date: Jan 2021
Posts: 17
Test-
Attached Images
File Type: jpg Suzuki GZ -1.jpg (145.7 KB, 8 views)
Stilkikn is offline  
Reply With Quote
Old 08-31-2021, 02:52 PM   #7
Stilkikn
Junior Member
 
Join Date: Jan 2021
Posts: 17
Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?
Stilkikn is offline  
Reply With Quote
Old 08-31-2021, 04:52 PM   #8
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Quote:
Originally Posted by Stilkikn View Post
Jonathan, I just tried attaching a photo by the method explained in FAQ. It was easy peazy once I re-sized the pic to meet site requirements. Not sure why uploading to an outside image hosting site would be a better option?
Generally, it saves space on the site and allows for higher quality images to be shared. For most things it's not a big deal. But when you're trying to show someone a metal shaving on an oily part, it can make a big difference.
jonathan180iq is offline  
Reply With Quote
Old 08-31-2021, 07:56 PM   #9
Stilkikn
Junior Member
 
Join Date: Jan 2021
Posts: 17
Makes sense, thanks.
Stilkikn is offline  
Reply With Quote
Reply



Tags
crankshaft


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:24 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.