![]() |
#1 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,099
|
Rear Axle Replacement
I over- torqued the nut on my rear axle and stripped the threads on it and am about to replace it.
My question is, does the new/used axle need to be greased before installing? Any other suggestions as to how to make it easiest to do will be appreciated. Thanks. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,099
|
Replaced the axle without any problems. While I was at it, I inspected the brake pads and cleaned out the brake dust, cleaned and inspected the sprockets for wear, checked and cleaned the spokes.
I replaced the chain and adjusted it and tightened the axle to specs. I also changed the oil and filter. After all that, I cleaned the bike up and polished the aluminum, waxed the fuel tank, and polished the fenders and chrome. I am pretty much ready to do some more riding once the weather is a bit more conducive for enjoyment. The winds have been intense here lately. Safe riding everyone. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: May 2010
Location: Birmingham, AL
Posts: 37
|
Yeah any time I have a moving part like that out, I grease it before reinstallation. So far it's a rule that's served me well!
Glad to hear your GZ got some TLC. I've got a few parts to fabricate for mine before she's where I want her but I can't wait for my first downtown cruise with her! |
![]() |
![]() |
![]() |
|
|