![]() |
#1 |
Member
Join Date: May 2017
Location: San Francisco/Bay Area
Posts: 31
|
![]()
Hello all , I am currently having lighting issues with my 2007 gz250 . I used my emergency lights after getting lost and after turning the bike back on all turn signals wear dead . and the turn signal indicator light (the small green one) was no longer working. First of all all my lights except headlight and rear brake light (only when brakes are applied ) still function. This means that my brake light will only light up if i apply the brake . Is that normal ?? I remember it always on before. none of my turning lights work . or stay on at any time. So i replaced all the turning light bulbs with bulbs from autozone, the front turning signals are now always lit up . The rear turning signals still will not function even with new bulbs !! and the turning light switch to indicate which way I am going doesn't seem to work . I push the switch left or right and neither the front or rear turn signals flash. Can you guys please help me? I have searched endlessly and have found no answer to this problem. I cant ride my motorcycle anymore because i use it to commute and i cant possible keep risking riding at night without any form of lighting in the back . Please help , dont just refer to other forums or posts. Thank you all in advance
Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Your brake light should only come on when brake is applyed (Thats correct) But the tail light part (Double contact bulb 1157) shpuld come on with key.....Did you replace front bulbs with double contact 1157 & rear with 1156 single contact?Also sounds like you have a couple blown fuses. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: May 2017
Location: San Francisco/Bay Area
Posts: 31
|
Thank you very much for your input
![]() ![]() Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Quote:
![]()
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
|
![]() |
![]() |
![]() |
#5 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Quote:
Login or Register to Remove Ads |
|
![]() |
![]() |
![]() |
#6 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Quote:
|
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
|
Just found this out today.
in the fuse box, looking at it from the left side of the bike... Right row third down 15 amp fuse. It will kill signals, brake light, horn and indicator lamps. That's on a 2000 model. But Headlight, front and rear running lights still lit. |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: May 2017
Location: San Francisco/Bay Area
Posts: 31
|
![]()
Hey guys so I guess there was some confusion and now some disagreements about the brake light . My original question was basically is the brake light supposed to be a running light and then when u apply the brakes both filaments light up for a stronger light telling people that you are braking . I got some different answers but now after buying contact cleaner and replacing the brake light bulb the answer at least in the USA is that yes the brake light is a running light !!!! I always remembered that when I bought it that it was already one . And now it works perfectly again , it runs like it should and then gets brighter when I apply the brake . As for my turn signal issue I cleaned and reconnected all contacts , replaced all fuses ( the ignition fuse was burn out but I had not noticed any issues starting the motorcycle ) , and everything worked fine , my turning signals work perfectly . That is until I plug the rear turn signals back in . For some reason the front turn signals work fine , perfectly fine until I plug in the rear ones to test if all of them work , as soon as I plug those in none of the turn signals work. The front ones stay lit up but will not flash . Are my rare turn signals bad ??? I replaced the bulbs and clean all contacts and still can't get the lights to work with the rear turn signals plugged in .
|
![]() |
![]() |
![]() |
#9 | |
Member
Join Date: May 2017
Location: San Francisco/Bay Area
Posts: 31
|
Quote:
|
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,099
|
You are making progress and learning about your bike. It can be frustrating at times but also rewarding when you figure it out. And remember, we are here to help as we are able to.
|
![]() |
![]() |
![]() |
Tags |
electrical, problems |
|
|