Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk

Reply
 
Thread Tools Display Modes
Old 06-23-2019, 01:54 PM   #1
ebasista
Junior Member
 
Join Date: Jun 2019
Posts: 4
Is the bike TCI or CDI ignition

Bought a GZ250 specifically to use the engine for a mini-trike. I downloaded the manual and see my stator pickup is bad (no voltage when cranking).

I'm obviously rewiring the system and have downloaded the FSM (thanks). My question is if the bike uses a TCI ignition or CDI? Based on 2 wires going to the coil I'm going to assume TCI, but wanted to double check with the experts.



Login or Register to Remove Ads
ebasista is offline  
Reply With Quote
Old 06-23-2019, 07:48 PM   #2
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
I understood it to be a CDI system. You might want to check with the nearest Suzuki dealership.
Vegas Street Rider is offline  
Reply With Quote
Old 06-04-2020, 08:46 PM   #3
raddad70
Junior Member
 
Join Date: May 2020
Posts: 23
I know this is an old post but I was trying to find out the same info and in the service manual I found the schematic. It shows a transistor not a capacitor so TCI it is. Hope this helps someone down the road.



Login or Register to Remove Ads
raddad70 is offline  
Reply With Quote
Old 12-24-2020, 07:10 PM   #4
ebasista
Junior Member
 
Join Date: Jun 2019
Posts: 4
I probably should have responded. You can use a cheap (15$) ignition from ebay intended for a GN125/GS400. Had to cut the wires off but I've got her running well.
Attached Images
File Type: jpg GZ250 ignitor.JPG (30.3 KB, 17 views)
ebasista is offline  
Reply With Quote
Old 01-01-2021, 12:20 AM   #5
raddad70
Junior Member
 
Join Date: May 2020
Posts: 23
Could you please tell me who the seller was. Can not seem to find one like yours. Also I like cutting wires too. Do you have a simple break down on how you wired this cheap CDI to your existing wire harness. Did you need a different ignition coil? Much appreciated



Login or Register to Remove Ads
raddad70 is offline  
Reply With Quote
Old 01-07-2021, 02:39 PM   #6
ebasista
Junior Member
 
Join Date: Jun 2019
Posts: 4
This is what was wired into my ebay CDI/TCI and the factory Harness

Blue: Pickup Wire 1
Green: Pickup Wire 2

White: Coil Trigger

Orange/White: +12V to Ignition and to Coil

Black/White: Ground

Orange/White +12V
ebasista is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.