Cant find rear inner tube any where

[dannylightning]

no one seems to carry a 130-90-15 or a 5.00/5.10/15 tube for the rear tire. i did find one metzler tube that stated it could be used for a lot of different sizes including the one for the gz but it either had a side valve stem or a tr 87 90 degree valve stem. i called the place and asked about the valve stems and they told me if i have a regular valve stem on my bike neither of those valve stems will work.

i would image the Suzuki dealer could get them but i don't want to make a 40 min drive each way just to order a tube and halve to make the drive again to pick them up.

[D Futch]

I just ordered one from Tiresunlimited.com for $12.01 + shipping got in about 3 days.

[dannylightning]

Originally Posted by D Futch

I just ordered one from Tiresunlimited.com for $12.01 + shipping got in about 3 days.

What size did you order, i don't see the correct size on the list..

[adrianinflorida]

You "can" use a 140/15 tube in a pinch, that's what was in my bike when I replaced the rear tire a few months back.

[Easy Rider]

Originally Posted by dannylightning

i called the place and asked about the valve stems and they told me if i have a regular valve stem on my bike neither of those valve stems will work.

WHAT ?? I'd like to hear an explanation for that. Makes NO sense to me.

[Sarris]

Me either. Mines got a 90 degree valve stem on the rear. Makes filling a lot easier.

:??:

[dannylightning]

Originally Posted by adrianinflorida

You "can" use a 140/15 tube in a pinch, that's what was in my bike when I replaced the rear tire a few months back.

well i guess ill just go to the dealer, i ordered tires and found a tube for the front. i searched like crazy yesterday for a rear tube and nothing my old tube is good but i would rather have a new one and the right one.

i guess i need to get break pads and a air filter any ways. cant seem to get any thing unless you order it from the dealer. thanks for the info, ill keep that in mind in case i ever get in a pinch.

if i make 4 of those wooden motorcycle jack stands and prop the bike up on them than take both wheels off will it be pretty sturdy, don't want it to to fall over.

[primal]

dannylightning, give BikeBandit.com or DennisKirk.com a try for parts.

[dannylightning]

Originally Posted by primal

dannylightning, give BikeBandit.com or DennisKirk.com a try for parts.

bike bandit did not seem to have one. i must have checked out about 30 different places and nothing.

i took a ride down to the dealer and ordered a tube, what the hell it's a really nice day i needed a air filter, front break pads and to get a key made any ways.

thanks for the suggestion though.

i set on one of the new s40's down there, that's a pretty cool looking little bike. it had some drag bars on it.