Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 05-15-2007, 04:53 PM   #1
1Rogue
Member
 
Join Date: May 2007
Location: Sachse, TX
Posts: 41
Adjusting Gearshift lever

Is there a way to adjust the foot gearshift lever up or down? Mine seems to be a little high to shift gears comfortably. I couldn't find anything in the service manual about doing it.



Login or Register to Remove Ads
1Rogue is offline  
Reply With Quote
Old 05-16-2007, 01:53 AM   #2
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Yes there is as a matter of fact. There is an adjustment rod between the actual shifter lever and the shaft that comes out the side of the transmission case. Undo the lock nuts on each end(keep in mind one end has a reversed thread) and turn the rod. As you turn the rod the shifter lever will raise or lower. Find the position you need most and tighten the locking nuts. Make the adjustment with the boots/shoes normally worn while riding. Minimum of tools needed and once done you will feel much better astride the bike. Ride safe.
Water Warrior 2 is offline  
Reply With Quote
Old 05-18-2007, 12:14 PM   #3
1Rogue
Member
 
Join Date: May 2007
Location: Sachse, TX
Posts: 41
Thanks Water Warrior! Sound pretty easy, I'm going to try this out this evening



Login or Register to Remove Ads
1Rogue is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:57 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.