Seat replacement and passenger pegs.

TonUpCafe · 11-03-2012, 11:44 PM

I want to put cafe style seat with a place for a passenger on my GZ.if not a cafe than at least a thinner one piece seat. As it is right now the frame has been cut and rewelded with an extension that is flat but I still have the factory single seat. Anyone know of any seats that will fit my current layout? should I just start off with a custom seatpan and go from there? Also trying to find out the diameter of the tube part of the frame because I want to attach clamp on passenger pegs. I think its 1" but its a pain to measure and wanted to know if anyone has done this before.

Water Warrior 2 · 11-04-2012, 12:01 AM

You are likely stuck with creating your own seat. As for the diameter of any tubing on the bike you might just as well buy a tool for measuring properly.

I've had this one so long it is more than old enough to vote.

alantf · 11-04-2012, 05:15 AM

Quote:

Originally Posted by Water Warrior

I agree. I've had mine over 40 years, and I still find that it's one of my most used tools. Everything from internal & external diameters to hole depths. It's also handy for finding the diameter of drill bits when the size marking has worn off. :2tup:

TonUpCafe · 11-16-2012, 01:35 PM

so purchased 1"-1.25" bolt on passenger pegs (for highway bars) and purchased myself a drill and rivet gun for veterans day and made myself a passenger seat with marine grade vinyl and outdoor furniture foam and a few rivets. going to need some help doing fiberglass work to make the rear cowl and repair the tank but totally different post.

http://instagram.com/p/R-WZ2GiQ5w/

Water Warrior 2 · 11-16-2012, 05:59 PM

Let your creative juices flow and keep us in the loop.

11-03-2012, 11:44 PM	#1
TonUpCafe Junior Member Join Date: May 2012 Location: Tallahassee Posts: 6	Seat replacement and passenger pegs. I want to put cafe style seat with a place for a passenger on my GZ.if not a cafe than at least a thinner one piece seat. As it is right now the frame has been cut and rewelded with an extension that is flat but I still have the factory single seat. Anyone know of any seats that will fit my current layout? should I just start off with a custom seatpan and go from there? Also trying to find out the diameter of the tube part of the frame because I want to attach clamp on passenger pegs. I think its 1" but its a pain to measure and wanted to know if anyone has done this before. Login or Register to Remove Ads
	0

11-04-2012, 12:01 AM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Seat replacement and passenger pegs. You are likely stuck with creating your own seat. As for the diameter of any tubing on the bike you might just as well buy a tool for measuring properly. I've had this one so long it is more than old enough to vote.
	0

11-16-2012, 01:35 PM	#4
TonUpCafe Junior Member Join Date: May 2012 Location: Tallahassee Posts: 6	Re: Seat replacement and passenger pegs. so purchased 1"-1.25" bolt on passenger pegs (for highway bars) and purchased myself a drill and rivet gun for veterans day and made myself a passenger seat with marine grade vinyl and outdoor furniture foam and a few rivets. going to need some help doing fiberglass work to make the rear cowl and repair the tank but totally different post. http://instagram.com/p/R-WZ2GiQ5w/
	0

11-16-2012, 05:59 PM	#5
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Seat replacement and passenger pegs. Let your creative juices flow and keep us in the loop. Login or Register to Remove Ads
	0