![]() |
#2 |
Senior Member
Join Date: Dec 2013
Location: manning, sc
Posts: 484
|
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Apr 2013
Location: Indiana
Posts: 621
|
Looks good, I'm also a fan of the tank.
Where did you get the seat? |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2013
Location: Tennessee
Posts: 83
|
Thanks! Its a sportster tank i got raw on ebay for about $85, it holds around 2.5 gallons, the front fairing i got off craigslist, he just said it was on his harley. And i got lucky with the seat and got it for 35 on ebay.
She still needs a lot of work but im excited to finally see progress. One of my biggest challenges is getting propper springs and find a way to mount then right Thanks for the feedback! Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Apr 2013
Location: Indiana
Posts: 621
|
I've been trying to build a seat for my bike and the springs was a real pain. I went through several different sizes before I found anything that actually worked.
If you have a good bike shop it you might have better luck finding an appropriate selection. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Dec 2013
Location: manning, sc
Posts: 484
|
just an idea. has any thought about checking one of these seats to see if they might be modified to work for your bobber projects?
![]() |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Apr 2013
Location: Indiana
Posts: 621
|
I would imagine you could put some mounting bolts thru the center of the flat plate in the back and turn the bar mount so that you could use it as a mounting point as well.
It would at least be a great starting point. |
![]() |
![]() |
![]() |
#9 |
Junior Member
Join Date: Feb 2014
Posts: 8
|
Looks cool.
|
![]() |
![]() |
![]() |
|
|