![]() |
#1 |
Junior Member
Join Date: Sep 2019
Posts: 4
|
![]()
I am looking for a good dual headlight for my 2005 gz250, i was thinking about this one https://www.ebay.com/itm/Twin-Front-...CSubmodel%3A--
But i was not sure if it would fit, any help? Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,099
|
It might take some modifications to the wiring harness as the stock headlight bucket acts as a junction box for a lot of circuits, but anything can be modified. It just takes patience and creativity.
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Sep 2019
Posts: 4
|
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2016
Location: Illinois
Posts: 174
|
Would have to make bracket to mount to the lower fork mount. There are some screw locations there. some for mounting existing light some to mount chrome decorative cover.
No matter what you'd need to make some bracket to install this. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Sep 2019
Posts: 4
|
How would i wire the new headlight, while also having the old one
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Apr 2016
Location: Illinois
Posts: 174
|
Sadly setup you're trying to buy is not LED and will use a lot of power. You will need to pull new cable from unused spot in fuse box (there are couple of them there). Use 10A fuse and min 16 gauge wire. Use relay controlled by existing headlight. If you were to find LED headlight setup (typically under 20W) you might be able to use existing wiring to additional headlight.
|
![]() |
![]() |
![]() |
|
|