New rider from Mississauga

[malomowny]

Hi everyone

I've just bought my motorcycle GZ250 from 2004.
I come from Poland in Europe and know I'm in Canada and I'm working here.
I hope that your knowledge help me with my problems and we would meet on some great common riding around town.

I'd like to ask a question. Do you have some ideas which may tune up/customize GZ250 into more mature bike, bigger, harley-davidson like or bobber style?

[5th_bike]

Welcome to the family!! :2tup:

Originally Posted by malomowny

Hi everyone [...]
Do you have some ideas which may tune up/customize GZ250 into more mature bike, bigger, harley-davidson like or bobber style?

Mature - um, the GZ is mature enough. :??:

For customization, check this post here:
http://www.gz250bike.com/forum/viewtopic.php?f=2&t=4786

[mole2]

Welcome to the forum from South Carolina. Ride safe.

[Water Warrior 2]

Originally Posted by malomowny

Hi everyone

I've just bought my motorcycle GZ250 from 2004.
I come from Poland in Europe and know I'm in Canada and I'm working here.
I hope that your knowledge help me with my problems and we would meet on some great common riding around town.

I'd like to ask a question. Do you have some ideas which may tune up/customize GZ250 into more mature bike, bigger, harley-davidson like or bobber style?

Welcome to the GZ forum. Always glad to have a new member join up. Please don't get in a hurry to change the bike. Learn it's capabilities first and then make a decision about modifications. The GZ is what it is, no more, no less. You may not like it in the long run and an altered bike might be harder to sell if you decide on a bigger, more powerful bike.

[malomowny]

Thanks for the replies guys. But you know - the best modification I would like to make is to make tail fender short. I was thinking about cut this plastic fender but there are metal parts underneath it. So do you have any ideas?

[Water Warrior 2]

The metal parts are the fender supports that can be cut off. Just remember there is no going back when you start cutting parts off.

[malomowny]

Yeah true, but I would like to make some modification to it, to make the tail side looks shorter.
Do you have any ideas guys?
Is there a shop or in the internet where I can find new / different shorter tail fenders for my bike?

[malomowny]

Actually I would like to look my rear fender just similar like this:

viewtopic.php?f=2&t=5005

viewtopic.php?f=2&t=2481

viewtopic.php?f=2&t=4645

[Goose51683]

My advice, take the leap and cut it. Draw some designs out, get a grease pencil and do it on your fender to get an idea of what it'll look like an just do it. Chop down the bars so you can use them or fab up some custom brackets and fit it that way. There really is little you can do to these bikes that is absolutely wrong. Chopping the bars off will not hurt the strength of the frame, and if you can weld then you can reinstall the bars if you hate it.

Worst case scenario you cut it up and you hate it. Fenders for these bikes are cheap, especially compared to some of those bigger bikes you were talking about at the top of this thread.

I encourage everyone I talk to, make your bike your own. Don't be an HD douche and try to look like everyone else. Be yourself and let your bike reflect that.

(I sound like a bikers self help book)

[malomowny]

Yup, that is an idea, but you know I don't have access to any tools, so I would like to buy some custom rear fender. Is it possible?