Vacuum line size Help

Kalel · 07-24-2013, 01:32 PM

Hey guys, my 2006 Suzuki GZ250 is running fine in prime, but then when in the on position it stalls... So I read the forum, check, took a look and it will prolly be the vacuum line. I would appreciate if someone has some ideas. does the bike have to have two rubber hoses from the pet cock? or just one?
Thanks for the help.... Great forum

blaine · 07-24-2013, 08:03 PM

Quote:

Originally Posted by Kalel

Hey guys, my 2006 Suzuki GZ250 is running fine in prime, but then when in the on position it stalls... So I read the forum, check, took a look and it will prolly be the vacuum line. I would appreciate if someone has some ideas. does the bike have to have two rubber hoses from the pet cock? or just one?
Thanks for the help.... Great forum

Two.The bigger one is fuel,the smaller on is the vacuum hose.

:cool:

Kalel · 07-24-2013, 10:46 PM

Thanks Blaine, So basically where I show in the pic is what my nice bike is missing? Do you know the size for the vacuum hose line? Thanks again.

blaine · 07-25-2013, 12:56 AM

Should be a nipple on the petcock that the vacuum hose from the carb goes to.I don't remember what size it is.

Kalel · 07-25-2013, 10:54 PM

Hey Blain, I found the hose, it is loose... please tell me it that is the right one... thanks, and where is supposed to be.. thanks again

blaine · 07-26-2013, 12:15 AM

That one is a float bowel drain hose.It just lies down over the back of the engine so if the carb floods the excess fuel flows onto the ground & not on the engine.

Kalel · 07-26-2013, 12:50 AM

I can't seem to find which one is the vacuum line..

blaine · 07-26-2013, 01:04 AM

Quote:

Originally Posted by Kalel

I can't seem to find which one is the vacuum line..

You should be able to feel it sucking air with the bike running.If it's open & sucking air the bike will run like crap.

:cool:

mole2 · 07-26-2013, 02:59 AM

Here is a picture of the shut off switch showing both niples. The small niple is the vacuum line.

Kalel · 07-26-2013, 01:37 PM

Hello, Mole2, thanks very much for the pictures.. they help a lot. So I check and it is definitely missing the vacuum hose, the small niple has nothing attached to it. I bought a 7/32'' ( 5.5mm) and it fits perfect in the small nipple... I also bought a 9/32'' (7.0 mm) as I was not sure, Now, where do I have to attach the other end? . I read the service manual, and could not find anything about the vacuum hose. Thanks again for the information...

07-24-2013, 01:32 PM	#1
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Vacuum line size Help Hey guys, my 2006 Suzuki GZ250 is running fine in prime, but then when in the on position it stalls... So I read the forum, check, took a look and it will prolly be the vacuum line. I would appreciate if someone has some ideas. does the bike have to have two rubber hoses from the pet cock? or just one? Thanks for the help.... Great forum Login or Register to Remove Ads
	0

07-24-2013, 10:46 PM	#3
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Re: Vacuum line size Help Thanks Blaine, So basically where I show in the pic is what my nice bike is missing? Do you know the size for the vacuum hose line? Thanks again. Login or Register to Remove Ads
	0

07-25-2013, 12:56 AM	#4
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: Vacuum line size Help Should be a nipple on the petcock that the vacuum hose from the carb goes to.I don't remember what size it is. __________________ If at first you do succeed, try not to look surprised.
	0

07-25-2013, 10:54 PM	#5
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Re: Vacuum line size Help Hey Blain, I found the hose, it is loose... please tell me it that is the right one... thanks, and where is supposed to be.. thanks again Login or Register to Remove Ads
	0

07-26-2013, 12:15 AM	#6
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: Vacuum line size Help That one is a float bowel drain hose.It just lies down over the back of the engine so if the carb floods the excess fuel flows onto the ground & not on the engine. __________________ If at first you do succeed, try not to look surprised.
	0

07-26-2013, 12:50 AM	#7
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Re: Vacuum line size Help I can't seem to find which one is the vacuum line..
	0

07-26-2013, 02:59 AM	#9
mole2 Senior Member Join Date: Dec 2009 Location: Longs, SC Posts: 1,469	Re: Vacuum line size Help Here is a picture of the shut off switch showing both niples. The small niple is the vacuum line. __________________ 2009 V-Star 650 Silverado Pearl White 2007 Suzuki GZ250 Black (sold)
	0

07-26-2013, 01:37 PM	#10
Kalel Member Join Date: Jul 2013 Location: New Jersey Posts: 48	Re: Vacuum line size Help Hello, Mole2, thanks very much for the pictures.. they help a lot. So I check and it is definitely missing the vacuum hose, the small niple has nothing attached to it. I bought a 7/32'' ( 5.5mm) and it fits perfect in the small nipple... I also bought a 9/32'' (7.0 mm) as I was not sure, Now, where do I have to attach the other end? . I read the service manual, and could not find anything about the vacuum hose. Thanks again for the information...
	0