One Piece Seat

blhohrein · 11-10-2011, 11:16 AM

I've seen on Ebay before a aftermarket seat for the Geezer that is one solid seat; like a sportster. However I'm finally ready to buy it and can't locate it. If anyone can help me find this seat, I would be most grateful.

Someone needs to start a GZ250 Aftermarket company... They'd make a killing.

Brandon Hohrein
Pottstown PA

Gz Rider · 11-10-2011, 12:06 PM

...

blhohrein · 11-10-2011, 12:30 PM

Yes, you do loose storage under the seat. i need the rear portion of the seat is not for passengers but for holding saddle bags in place.

bares a resemblance to this one.
http://www.steelthundercc.com/assets/sp ... /27052.jpg

And its all part of my master plan for this bike.

Jvacustoms · 11-10-2011, 12:44 PM

I have been contemplating making a custom seat for mine that is a one piece using the same seat pans and just joining them with a piece of steel and recovering both. and instead of using the setup that is there now for the bolt down area use either a smaller bolt that can drop through the bottom or drill the hole out and use a carriage bolt built into the seat and a bolt on the bottom.how ever I had an idea of getting a secondary lock mechanism from the front seat and retrofitting a joint in the back as well with the same snap in and lock method so that you didn't lose the access to storage or in my case the easiest method of air filter removal for cleaning, as I have a created a new air filter assembly for my bike to let it breath as easy as it wants. the alternative idea was to use a bike quick release bolt for the front tires and a slotted seat. Maybe these Ideas can help you as I haven't gotten to the actual fabrication part yet.

blhohrein · 11-10-2011, 12:55 PM

Yeah... I'm more of a bolt on guy... I like to buy things that already look good when i pull it out of the box. just add screws kind of thing.

Jvacustoms · 11-10-2011, 01:00 PM

well good luck on your search, I am more of the kinda guy that likes to make people guess what the heck he is riding! and never get it right...lol

Gz Rider · 11-10-2011, 04:11 PM

...

**jonathan180iq** · 11-10-2011, 05:25 PM

As far as custom seats go, this is as good as it gets on the GZ.

Harley Cop bike seat - viewtopic.php?f=8&t=4646

Everything else has just been padding or custom shaving.

I've never seen a complete, one-piece seat.
Sarris went so far as to buy a Corbin seat that was said to fit the GZ, but it wasn't true.
BadBob had a seat custom made by Sargent Cycles. That's an option, but it's only available upon request. There is nothing kept in stock.

Sargent Cycles Seat - http://www.gz250bike.com/forum/viewtopi ... Cycle#p451

blhohrein · 11-10-2011, 10:17 PM

Just like the look of the single component.

**jonathan180iq** · 11-11-2011, 10:03 AM

Then why not just use the factory seat and pillion seat and recover them under one piece of vinyl?

Use a sheet metal mating plate along the bottom so they hold their shape.
Then recover both using one piece of your favorite material, giving the illusion of a one piece seat?

11-10-2011, 11:16 AM	#1
blhohrein Junior Member Join Date: Nov 2011 Location: Pottstown PA Posts: 11	One Piece Seat I've seen on Ebay before a aftermarket seat for the Geezer that is one solid seat; like a sportster. However I'm finally ready to buy it and can't locate it. If anyone can help me find this seat, I would be most grateful. Someone needs to start a GZ250 Aftermarket company... They'd make a killing. Brandon Hohrein Pottstown PA Login or Register to Remove Ads
	0

11-10-2011, 12:06 PM	#2
Gz Rider Senior Member Join Date: Aug 2011 Posts: 852	Re: One Piece Seat ... __________________ *Alert - This person is a douche. Use these comments and advice at your own risk*
	0

11-10-2011, 12:30 PM	#3
blhohrein Junior Member Join Date: Nov 2011 Location: Pottstown PA Posts: 11	Re: One Piece Seat Yes, you do loose storage under the seat. i need the rear portion of the seat is not for passengers but for holding saddle bags in place. bares a resemblance to this one. http://www.steelthundercc.com/assets/sp ... /27052.jpg And its all part of my master plan for this bike. Login or Register to Remove Ads
	0

11-10-2011, 12:44 PM	#4
Jvacustoms Senior Member Join Date: Jul 2011 Location: Eatonton, GA Posts: 237	Re: One Piece Seat I have been contemplating making a custom seat for mine that is a one piece using the same seat pans and just joining them with a piece of steel and recovering both. and instead of using the setup that is there now for the bolt down area use either a smaller bolt that can drop through the bottom or drill the hole out and use a carriage bolt built into the seat and a bolt on the bottom.how ever I had an idea of getting a secondary lock mechanism from the front seat and retrofitting a joint in the back as well with the same snap in and lock method so that you didn't lose the access to storage or in my case the easiest method of air filter removal for cleaning, as I have a created a new air filter assembly for my bike to let it breath as easy as it wants. the alternative idea was to use a bike quick release bolt for the front tires and a slotted seat. Maybe these Ideas can help you as I haven't gotten to the actual fabrication part yet.
	0

11-10-2011, 12:55 PM	#5
blhohrein Junior Member Join Date: Nov 2011 Location: Pottstown PA Posts: 11	Re: One Piece Seat Yeah... I'm more of a bolt on guy... I like to buy things that already look good when i pull it out of the box. just add screws kind of thing. Login or Register to Remove Ads
	0

11-10-2011, 01:00 PM	#6
Jvacustoms Senior Member Join Date: Jul 2011 Location: Eatonton, GA Posts: 237	Re: One Piece Seat well good luck on your search, I am more of the kinda guy that likes to make people guess what the heck he is riding! and never get it right...lol
	0

11-10-2011, 04:11 PM	#7
Gz Rider Senior Member Join Date: Aug 2011 Posts: 852	Re: One Piece Seat ... __________________ *Alert - This person is a douche. Use these comments and advice at your own risk*
	0

11-10-2011, 05:25 PM	#8
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: One Piece Seat As far as custom seats go, this is as good as it gets on the GZ. Harley Cop bike seat - viewtopic.php?f=8&t=4646 Everything else has just been padding or custom shaving. I've never seen a complete, one-piece seat. Sarris went so far as to buy a Corbin seat that was said to fit the GZ, but it wasn't true. BadBob had a seat custom made by Sargent Cycles. That's an option, but it's only available upon request. There is nothing kept in stock. Sargent Cycles Seat - http://www.gz250bike.com/forum/viewtopi ... Cycle#p451
	0

11-10-2011, 10:17 PM	#9
blhohrein Junior Member Join Date: Nov 2011 Location: Pottstown PA Posts: 11	Re: One Piece Seat Just like the look of the single component.
	0

11-11-2011, 10:03 AM	#10
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: One Piece Seat Then why not just use the factory seat and pillion seat and recover them under one piece of vinyl? Use a sheet metal mating plate along the bottom so they hold their shape. Then recover both using one piece of your favorite material, giving the illusion of a one piece seat?
	0