Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > General Motorcycle-Related > Riding Safety & Tips > Lessons Well-Learned

Reply
 
Thread Tools Display Modes
Old 03-07-2012, 03:44 PM   #1
tsmall
Senior Member
 
Join Date: Sep 2011
Location: North Carolina, United States
Posts: 168
Loading you bike

Don't try to do it by yourself and try to "drive it up" standing to the side and using the throttle and clutch. Shut it off and get a helper to push the thing up. And damn sure don't have teenage flash backs that you can drive it up the ramp. Unless you're 15 years old with a YZ 80!



Login or Register to Remove Ads
tsmall is offline  
Reply With Quote
Old 03-07-2012, 08:18 PM   #2
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Loading you bike

15 years old ! I was even more silly. 30 something and tried to ride my bike up into the side door of my van. Made it in but had tire marks on a nice mahogany interior that I slaved over. The carpet cushioned me so the bike could land on me.
Water Warrior 2 is offline  
Reply With Quote
Old 03-08-2012, 01:36 PM   #3
tsmall
Senior Member
 
Join Date: Sep 2011
Location: North Carolina, United States
Posts: 168
Re: Loading you bike

WW, Great! Hahaha Yeah, I have some grass that helped the bike land nice and soft on me!



Login or Register to Remove Ads
tsmall is offline  
Reply With Quote
Old 03-08-2012, 03:06 PM   #4
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Loading you bike

Years ago I had a custom trailer made up.. Everything but the flooring and electrical. I finished it at home and set it up for 1, 2 or 3 bikes. Were talking dirt/off road bikes. Maybe 2 street bikes. It was the typical 8 ft long but I went with a 7 ft width rather than 6 or 6.5. Made a world of difference for mobility when tying down the bikes or whatever else I carried.
Fate stepped in and I carried more lumber, drums of gas and riding lawn mowers than bikes.
Water Warrior 2 is offline  
Reply With Quote
Old 04-13-2012, 08:02 AM   #5
greatmaul
Senior Member
 
Join Date: Nov 2011
Location: Sacramento, CA
Posts: 296
Re: Loading you bike

Ouch. How is your leg doing? Hope you're healing well.



Login or Register to Remove Ads
greatmaul is offline  
Reply With Quote
Old 04-13-2012, 01:33 PM   #6
riningr
Junior Member
 
Join Date: Mar 2012
Location: Charlotte, MI
Posts: 24
Re: Loading you bike

My first time unloading a bike out of the back of my truck was my biggest failure... it was my Kawasaki KZ750 and I didn't have ramps yet so I backed my truck into a ditch to be able to push the bike straight into the back, and put it in backwards, so then I got it where I was going and I backed my truck up and had a 2x6 plank that I used to unload it and was afraid the 2x6 would slide out so I took the tailgate off and put the 2x6 on the back bumper then put the other end up against a curb and thought I would just ride the bike down the plank... which was OK until the front tire of the bike hit the curb and stopped and I couldn't put a foot down on either side so dumped the bike over on top of myself... luckily the back tire stayed up on the rear bumper of my truck so not all of the weight came down on me, but I was still sore for a while... then get out from under the bike and have to gather the strength to pick the bike up and get it back on the board to finish taking it down out of the truck...

I load my XS1100 by running it and clutch/brake/gasing on the way up because it is HEAVY, but I have a nice set of ramps now and always put the bike on my right ramp which feels natural grip to me since I always get on the bike with it on my right and I can walk up the left ramp, my ramps are nice aluminum ramps that have bars going across about every 4" or so and are arched in the middle so the 4" spacing and the arch helps support the bike from rolling backwards a little. My GZ250 is a LOT lighter though, so I don't need to power load it, I can push it up the ramps into the back of my truck by myself without power loading. My ramps also have straps that wrap around the tailgate to keep them from sliding off which makes a big difference too =)
riningr is offline  
Reply With Quote
Old 04-15-2012, 12:42 AM   #7
Rionna
Senior Member
 
Join Date: May 2011
Location: Temple, Texas
Posts: 176
Re: Loading you bike

Wow, I hope you're not in too much pain and heal quickly.
__________________
Rionna
Rionna is offline  
Reply With Quote
Old 04-15-2012, 03:23 AM   #8
mole2
Senior Member
 
mole2's Avatar
 
Join Date: Dec 2009
Location: Longs, SC
Posts: 1,469
Re: Loading you bike

Quote:
Originally Posted by riningr
My first time unloading a bike out of the back of my truck was my biggest failure... it was my Kawasaki KZ750 and I didn't have ramps yet so I backed my truck into a ditch to be able to push the bike straight into the back, and put it in backwards, so then I got it where I was going and I backed my truck up and had a 2x6 plank that I used to unload it and was afraid the 2x6 would slide out so I took the tailgate off and put the 2x6 on the back bumper then put the other end up against a curb and thought I would just ride the bike down the plank... which was OK until the front tire of the bike hit the curb and stopped and I couldn't put a foot down on either side so dumped the bike over on top of myself... luckily the back tire stayed up on the rear bumper of my truck so not all of the weight came down on me, but I was still sore for a while... then get out from under the bike and have to gather the strength to pick the bike up and get it back on the board to finish taking it down out of the truck...

I load my XS1100 by running it and clutch/brake/gasing on the way up because it is HEAVY, but I have a nice set of ramps now and always put the bike on my right ramp which feels natural grip to me since I always get on the bike with it on my right and I can walk up the left ramp, my ramps are nice aluminum ramps that have bars going across about every 4" or so and are arched in the middle so the 4" spacing and the arch helps support the bike from rolling backwards a little. My GZ250 is a LOT lighter though, so I don't need to power load it, I can push it up the ramps into the back of my truck by myself without power loading. My ramps also have straps that wrap around the tailgate to keep them from sliding off which makes a big difference too =)
[youtube:25x9gcfv]http://www.youtube.com/watch?v=UrzpKCAtTDY[/youtube:25x9gcfv]


__________________
2009 V-Star 650 Silverado Pearl White
2007 Suzuki GZ250 Black (sold)
mole2 is offline  
Reply With Quote
Old 04-15-2012, 06:12 AM   #9
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Loading you bike

That was 51 seconds of silly. How many able bodied men were available to safely push the bike up a good ramp. The rider of the bike knew nothing about slipping the clutch to keep the RPM up and being a bit aggressive when starting up a hill. Something we all learn if we take a riding course.
Water Warrior 2 is offline  
Reply With Quote
Old 04-15-2012, 05:17 PM   #10
riningr
Junior Member
 
Join Date: Mar 2012
Location: Charlotte, MI
Posts: 24
Re: Loading you bike

ouch poor bike =)... well my 750 wasn't nearly that big, and I didn't have nearly as many people there to witness it (was just me around) and that was trying to ride it down out of my pickup truck, I've never wanted/attempted to ride it up into the truck... that was my first and only attempt to ride it out of the truck... like I said above I'll walk it up using the gas/brake to load it, but unloading I walk it down with the front brake
riningr is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:12 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.