03-15-2012, 10:00 PM
|
#1 |
|
Junior Member
Join Date: Apr 2011
Location: Scandia,MN
Posts: 15
|
Brake light
Just got my GZ out of winter storage and was checking it out and noticed the brake light didn't come on when I used the hand brake, but it does with the foot brake. Any advice on where to start to fix this? The weather in Minnesota has been unbelievable and I'm excited to get back out! Thanks.
Login or Register to Remove Ads |
|
|
|
03-15-2012, 11:09 PM
|
#2 |
|
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: Brake light
There are two separate brake light switches.one for the foot pedal & one for the lever.Check the switch that is activated by the lever.It may need replacing or the lever is not contacting the switch.
:cool: 
__________________
If at first you do succeed, try not to look surprised. 
|
|
|
|
|
03-16-2012, 02:03 AM
|
#4 |
|
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: Brake light
The switch is usually part of the lever housing/clamp with a couple wires leading to it. When you pull the lever a small plunger will be released and make an internal contact to complete the circuit. Take a good look with good lighting while working the lever. When the lever pivots you should see the plunger. It may be hanging up due to lack of use and a bit of corrosion from winter storage. A spray of contact cleaner may be all you need.
|
|
|
|
 |
|
|
Linear Mode
