DaSchmoo's Bobber Bike

DaSchmoo · 10-29-2015, 07:05 PM

Not a true bobber, but more of a hybrid cruiser... or whatever you want to call it.

My mods:
Cut front and back fenders.
Motherroad customs solo seat.
Cut off lot of clips and tabs for old side plastics, reflectors, and rear pegs.
Painted fenders, horn and tank flat black.
chrome bullet signals.
low profile black mirrors.
2" rise street bars and new grips.
chrome pod air filter.
chrome pod crankcase breather filter.
Jetted carb. (132.5 main jet, shimmed needle, 22.5 pilot jet, mixture 2.5 turns out)
16t sprocket.
chrome battery cover.
Cut off front half of tool/storage bin, moved all electronics into top of bin.
chrome axle mounted brake light/license plate holder.

Vegas Street Rider · 10-31-2015, 01:14 PM

The mods look great. The bobber look is not my style but I certainly appreciate anything that makes the bike reflect the owner/rider's personality. Thanks for the great pics as well.

DaSchmoo · 11-01-2015, 02:54 PM

Thanks Vegas. appreciate the input.

bpmadden · 02-03-2016, 10:43 AM

Beautiful work! How long can you go on that seat before you start feeling it too much?

Water Warrior 2 · 02-03-2016, 07:26 PM

The seat is probably far more comfy than the plywood seat I had in an old Mini back in the 60's.

Bobbers are not my thing but this one shows a well though out plan instead of some butcher jobs that show up on CL.

jewman22 · 09-01-2016, 08:48 PM

nice work, how far did you lower your rear fender? seems a fair bit lower then mine.

Flathead · 01-15-2017, 10:18 AM

You done a very nice alteration. It is hard to do anything with those oversize fenders and make them look good. The matte paint makes a difference. The engine vent filter is good look.

Water Warrior 2 · 01-16-2017, 10:22 PM

Quote:

Originally Posted by DaSchmoo

Not a true bobber, but more of a hybrid cruiser... or whatever you want to call it.

My mods:
Cut front and back fenders.
Motherroad customs solo seat.
Cut off lot of clips and tabs for old side plastics, reflectors, and rear pegs.
Painted fenders, horn and tank flat black.
chrome bullet signals.
low profile black mirrors.
2" rise street bars and new grips.
chrome pod air filter.
chrome pod crankcase breather filter.
Jetted carb. (132.5 main jet, shimmed needle, 22.5 pilot jet, mixture 2.5 turns out)
16t sprocket.
chrome battery cover.
Cut off front half of tool/storage bin, moved all electronics into top of bin.
chrome axle mounted brake light/license plate holder.

Just had a random thought. You and Flathead should get together and do do a Suzuki S40 with your talents and attention to detail.

Flathead · 01-24-2017, 08:40 PM

Flathead here.
Better yet, lets put that 650 Thumper engine in a GZ frame. Now that would be a hoot. I would ride that for free.
Nice ride Sir. Keep up the Fire.

Water Warrior 2 · 02-11-2017, 05:31 PM

Quote:

Originally Posted by Flathead

Flathead here.
Better yet, lets put that 650 Thumper engine in a GZ frame. Now that would be a hoot. I would ride that for free.
Nice ride Sir. Keep up the Fire.

That sounds like more work than I would ever take on. Just trying to do the chain drive to belt drive set up on a GZ frame could get dicey.

11-01-2015, 02:54 PM	#3
DaSchmoo Junior Member Join Date: Oct 2015 Location: Charleson, SC Posts: 2	Thanks Vegas. appreciate the input. Login or Register to Remove Ads
	0

02-03-2016, 07:26 PM	#5
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	The seat is probably far more comfy than the plywood seat I had in an old Mini back in the 60's. Bobbers are not my thing but this one shows a well though out plan instead of some butcher jobs that show up on CL. Login or Register to Remove Ads
	0

10-31-2015, 01:14 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,105	The mods look great. The bobber look is not my style but I certainly appreciate anything that makes the bike reflect the owner/rider's personality. Thanks for the great pics as well.
	0

02-03-2016, 10:43 AM	#4
bpmadden Junior Member Join Date: Feb 2016 Posts: 3	Beautiful work! How long can you go on that seat before you start feeling it too much?
	0

09-01-2016, 08:48 PM	#6
jewman22 Junior Member Join Date: Aug 2016 Location: ontario Posts: 11	nice work, how far did you lower your rear fender? seems a fair bit lower then mine.
	0

01-15-2017, 10:18 AM	#7
Flathead Junior Member Join Date: Jul 2016 Location: Louisiana Posts: 16	You done a very nice alteration. It is hard to do anything with those oversize fenders and make them look good. The matte paint makes a difference. The engine vent filter is good look.
	0

01-24-2017, 08:40 PM	#9
Flathead Junior Member Join Date: Jul 2016 Location: Louisiana Posts: 16	Flathead here. Better yet, lets put that 650 Thumper engine in a GZ frame. Now that would be a hoot. I would ride that for free. Nice ride Sir. Keep up the Fire.
	0