![]() |
#1 |
Member
Join Date: Jul 2013
Location: Nashville, TN
Posts: 43
|
Seat lock help
I just bought a used GZ with a minor problem. I can't look under the seat to checkout the helmet straps and tools. When I put my key in the lock, the lock is not stationary and then just pushes through without anything holding it. Any ideas from seasoned GZers?
Thx ![]() Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: Seat lock help
A few years ago I had the same problem. The bolts holding the lock to the side panel had vibrated loose, and dropped out. At the time, I posted a topic advising people to check them. What you need to do is to get a length of wire, such as a wire coat hanger, make a hook in one end and then hook the cable which is attached to the lock. Pull the lock back into the hole and while holding it, get the key in and unlock the saddle. Not as easy as it sounds, but with perseverence I managed it. Then you can remove the side panel and rebolt the lock, using locktight.
viewtopic.php?f=5&t=4008
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jul 2013
Location: Nashville, TN
Posts: 43
|
Re: Seat lock help
I'll try it thx. Love this Forum. Getting to share the good and the bad and tips. I'll be getting some Rotella by tomorrow to change the oil. It only has 1800 miles on it.
Login or Register to Remove Ads |
![]() |
![]() |
![]() |
|
|