Backfiring and uneven idle - Page 8

roncg41677 · 02-23-2009, 08:01 PM

Didn't check to see if the switch could be moved. That's a good idea. I'll check it out in the daylight tomorrow.

BTW, I totally rely on you guys here on this forum and appreciate all the help SO much. I have biker friends, and some with some good mechanical know-how. But they are almost all Harley Riders and when it comes to metrics they seem as intimidated as I am

. It's good to know I can come here and get help from people who are familiar with MY bike. I feel like a leach sometimes, because I'm not contributing too much (at all) on other threads, but I hope to do that more as I keep learning.

mr. softie · 02-23-2009, 08:05 PM

You will, as time goes on, do your share of helping I'm sure.

Water Warrior 2 · 02-23-2009, 09:52 PM

Quote:

Originally Posted by mr. softie

You will, as time goes on, do your share of helping I'm sure.

What he said. +1

roncg41677 · 02-23-2009, 10:37 PM

I popped on out and looked at the switch with a flashlight. It doesn't look like it will move. I think I'll see if I can tape something on the stand so it will push the button in further and see if that makes a difference.

...still don't know why it's bogging down when I rev it though :??:

patrick_777 · 02-24-2009, 12:25 AM

Quote:

Originally Posted by roncg41677

...some with some good mechanical know-how. But they are almost all Harley Riders and when it comes to metrics they seem as intimidated as I am...

That's funny because they probably have a LOT more troubleshooting and hands-on experience than anybody with a metric bike.

:poke2:

Easy Rider · 02-24-2009, 11:16 AM

Quote:

Originally Posted by roncg41677

...still don't know why it's bogging down when I rev it though :??:

Either:
1) It vibrates more and the marginal contact becomes MORE marginal
OR
2) You have an entirely different problem that you will need to address AFTER you solve the problem of dying when you put it in gear.

roncg41677 · 02-24-2009, 12:40 PM

I wish for #1!

Easy Rider · 02-24-2009, 01:21 PM

Quote:

Originally Posted by roncg41677

I wish for #1!

Have you ordered a new switch assembly yet.......or made an appointment at the dealer ??

Wishing alone probably will not solve it! :biggrin:

roncg41677 · 02-24-2009, 01:51 PM

No. I still am going to try to fix some way to push the switch in farther and see if that does it. The nearest dealership here is about 30 miles.

adrianinflorida · 02-24-2009, 02:28 PM

Quote:

Originally Posted by roncg41677

No. I still am going to try to fix some way to push the switch in farther and see if that does it. The nearest dealership here is about 30 miles.

Hell, if I ever had any free time between kids and work, I'd drive over to Dunellon and put the damn switch on for ya.

02-23-2009, 08:01 PM	#71
roncg41677 Member Join Date: Jun 2008 Location: Dunnellon, FL Posts: 96	Re: Backfiring and uneven idle Didn't check to see if the switch could be moved. That's a good idea. I'll check it out in the daylight tomorrow. BTW, I totally rely on you guys here on this forum and appreciate all the help SO much. I have biker friends, and some with some good mechanical know-how. But they are almost all Harley Riders and when it comes to metrics they seem as intimidated as I am . It's good to know I can come here and get help from people who are familiar with MY bike. I feel like a leach sometimes, because I'm not contributing too much (at all) on other threads, but I hope to do that more as I keep learning. __________________ ~ Matthew 6:33 ~ Login or Register to Remove Ads
	0

02-23-2009, 08:05 PM	#72
mr. softie Senior Member Join Date: Jun 2008 Location: Bucks Co. PA Posts: 361	Re: Backfiring and uneven idle You will, as time goes on, do your share of helping I'm sure. __________________ The real money in a gold rush is in supplying liqueur and women to the miners.... May the wind always be at your back and the sun overhead as you make your way down the ever winding, smoothly paved, traffic free road!
	0

02-23-2009, 10:37 PM	#74
roncg41677 Member Join Date: Jun 2008 Location: Dunnellon, FL Posts: 96	Re: Backfiring and uneven idle I popped on out and looked at the switch with a flashlight. It doesn't look like it will move. I think I'll see if I can tape something on the stand so it will push the button in further and see if that makes a difference. ...still don't know why it's bogging down when I rev it though :??: __________________ ~ Matthew 6:33 ~
	0

02-24-2009, 12:40 PM	#77
roncg41677 Member Join Date: Jun 2008 Location: Dunnellon, FL Posts: 96	Re: Backfiring and uneven idle I wish for #1! __________________ ~ Matthew 6:33 ~
	0

02-24-2009, 01:51 PM	#79
roncg41677 Member Join Date: Jun 2008 Location: Dunnellon, FL Posts: 96	Re: Backfiring and uneven idle No. I still am going to try to fix some way to push the switch in farther and see if that does it. The nearest dealership here is about 30 miles. __________________ ~ Matthew 6:33 ~
	0