Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Instructional Articles

Reply
 
Thread Tools Display Modes
Old 11-26-2011, 09:10 PM   #21
mavrix
Member
 
Join Date: Jun 2011
Location: Northfield, MA
Posts: 38
Send a message via Yahoo to mavrix
Re: Change the sparkplug

I changed my spark plug today and it was super easy thanks to this post... thank you for posting this Patrick!
__________________
-Mavrix



Login or Register to Remove Ads
mavrix is offline  
Reply With Quote
Old 01-06-2012, 04:25 PM   #22
chandlerbingfl
Senior Member
 
Join Date: Apr 2010
Location: Florida
Posts: 142
Re: Change the sparkplug

Quote:
Originally Posted by patrick_777
Tighten it with your fingers first, then torque it correctly (18N-m or 13 ft-lbs). This is generally only 1/8th turn of the plug past finger tight. NO MORE. You do not want to strip the plug threads nor damage your block.

Enjoy.
I follwed your steps but when replacing w/ a new plug I can only turn w/ fingers a few turns. It appeared to start properly but I had to use a socket to get it to turn further.

I immediately found your post, read it and tried it again. I can only turn the plug a few turns before it gets hard to turn unless using a socket. I checked the threads on the original plug as well as the new plug after removal and the threads look clean so I seriously doubt any kind of striping of the threads. Can I use some WD-40 on the threads?

Thanks!
Chandler
chandlerbingfl is offline  
Reply With Quote
Old 01-06-2012, 04:44 PM   #23
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: Change the sparkplug

Yes,you can use some WD-40 on the threads.Did the old plug come out easily? If so there may be some carbon on the threads.
:cool:
__________________
If at first you do succeed, try not to look surprised.





Login or Register to Remove Ads
blaine is offline  
Reply With Quote
Old 01-06-2012, 05:46 PM   #24
JWR
Senior Member
 
JWR's Avatar
 
Join Date: Jan 2009
Location: Louisville, TN
Posts: 1,413
Re: Change the sparkplug

The head threads will strip or cross thread before the plug.

WD 40, oil, or anti seize will work.
__________________
Jerry

Truth is there are lots of great bikes available
and not nearly as many good riders out there riding them...
"A man's got to know his limitations..."
JWR is offline  
Reply With Quote
Old 01-06-2012, 10:02 PM   #25
chandlerbingfl
Senior Member
 
Join Date: Apr 2010
Location: Florida
Posts: 142
Re: Change the sparkplug

Thanks for the replies! I used WD-40 and it did thread a bit easier.... Tightened it w/ the socket and good to go...

Unfortunately my starting problem is more battery related that plug but the plug was due for a change anyway....

Thanks again for the great resource!
Chandler



Login or Register to Remove Ads
chandlerbingfl is offline  
Reply With Quote
Old 01-16-2012, 03:21 PM   #26
cibolorider
Junior Member
 
Join Date: Nov 2011
Location: San Antonio, Texas
Posts: 14
Re: Change the sparkplug

I thought the spark plug wrench was 18mm. This post says 17mm. Can anyone straighten me out on this?
cibolorider is offline  
Reply With Quote
Old 01-16-2012, 05:23 PM   #27
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: Change the sparkplug

Quote:
Originally Posted by Gz Rider
By measuring the sparkplug tool against a 17, 18 and 19mm socket with a caplier, I find the Suzuki Sparkplug tool closest to if not an exact match of the 18mm socket.

Keep in mind I don't think just any 18mm socket will do it because the plug is pretty tight in there. I've not heard of anyone being able to use anything other than the Sukuki tool.
18mm thin wall socket will fit.That's all I ever used. :cool:
__________________
If at first you do succeed, try not to look surprised.


blaine is offline  
Reply With Quote
Old 01-16-2012, 08:45 PM   #28
cibolorider
Junior Member
 
Join Date: Nov 2011
Location: San Antonio, Texas
Posts: 14
Re: Change the sparkplug

Thanks guys, that's what I thought.
cibolorider is offline  
Reply With Quote
Old 02-13-2012, 05:23 PM   #29
Road_Clam
Senior Member
 
Join Date: Feb 2012
Location: sounthern NH
Posts: 146
Re: Change the sparkplug

Great tip ! Me personally STRONGLY advise using a dab of antisieze on the plug threads. My personal rule of thumb "almost" any bolt that comes out and I observe the imfamous "white powder" on the threads gets antisiezed. The only bolts I don't antisieze are sprocket bolts and brake caliper bolts, those get Loctited ! :2tup:
__________________
1984 GPz1100
1987 GSX-R 750
2006 HD Fatboy
2001 KX500
2007 YZ450F
2001 GZ250 (Wife's !)
Road_Clam is offline  
Reply With Quote
Old 02-16-2012, 06:20 AM   #30
Rider
Junior Member
 
Join Date: Feb 2012
Location: Romania
Posts: 14
Send a message via Yahoo to Rider
Re: Change the sparkplug

now that bike has a nice paintjob, is it from factory or did you painted it? silver+black+a red line, thats beautyful
__________________
[center:1qa4wj3q]Cantor[/center:1qa4wj3q]
Rider is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:43 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.