Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Instructional Articles

Reply
 
Thread Tools Display Modes
Old 07-10-2008, 11:39 PM   #21
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Here is a photo showing the placement of washers that have been in described in the first few messages of this thread.


NOTICE. My bike is a 2006 and I do not have the selectable circlip grooves that have been described in other posts on the forum.



Login or Register to Remove Ads
jonathan180iq is offline  
Reply With Quote
Old 11-30-2008, 08:46 PM   #22
Canuck
Senior Member
 
Join Date: Aug 2008
Location: Vancouver Island
Posts: 159
Re: Needle shim modification

So far i have done the 16t and the Needle Shim

Having ridden awhile with the 16t I decided to try this shimming idea.

I'm pretty happy with it.. cruising in 5th gear is smoother and toned down abit
At minimal throttle before the shim i went from 60 kms down to 55 km at the same setting so it was definitely a great change.

not sure how i feel about the loss in mileage as noted by badbob but we will see..
Canuck is offline  
Reply With Quote
Old 11-30-2008, 08:53 PM   #23
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: Needle shim modification

Quote:
Originally Posted by Canuck
not sure how i feel about the loss in mileage as noted by badbob but we will see..
That depends a LOT on your riding conditions and habits.
I predict that, unless you keep really good records, you won't notice any significant difference.
I didn't......with just the 16T and no carb mods, that is.
__________________
Loud pipes risk rights!



Login or Register to Remove Ads
Easy Rider is offline  
Reply With Quote
Old 12-01-2008, 03:22 AM   #24
Canuck
Senior Member
 
Join Date: Aug 2008
Location: Vancouver Island
Posts: 159
Re: Needle shim modification

I took the washer and put it underneath...

Is it better to keep the stock washer on top and get another one for underneath...does it matter or will it be alright with the switched stock washer...??

any bad experiences yet with the needle shim modification? or is everyone all thumbs for it ?
Canuck is offline  
Reply With Quote
Old 12-01-2008, 04:55 AM   #25
Badbob
Senior Member
 
Badbob's Avatar
 
Join Date: Aug 2006
Location: Tallahassee FL
Posts: 945
Re: Needle shim modification

I switched the washer position about 18,000 miles (guess) ago. No problems yet.



Login or Register to Remove Ads
Badbob is offline  
Reply With Quote
Old 03-22-2009, 05:24 PM   #26
Canuck
Senior Member
 
Join Date: Aug 2008
Location: Vancouver Island
Posts: 159
Re: Needle shim modification

Switched back my washer position to original and now only with a 16 tooth modifying the bikes gear.

Just wasnt worth the lost gas mileage and probably isnt great for overall longevity of the bike.. ? perhaps

I did like the flat spots eliminated but.. it wasnt that great of a different overall.
Canuck is offline  
Reply With Quote
Old 03-22-2009, 05:49 PM   #27
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: Needle shim modification

Quote:
Originally Posted by Canuck
Switched back my washer position to original and now only with a 16 tooth modifying the bikes gear.
OK, so now that you are getting closer to stock, how does your idle speed act? Is it a LOT different when thoroughly HOT than it is when just coming down off the choke?
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Old 03-23-2009, 01:37 AM   #28
Canuck
Senior Member
 
Join Date: Aug 2008
Location: Vancouver Island
Posts: 159
Re: Needle shim modification

Easy, since the valve adjustment the bikes only problem is needing new rear brake cables and rear hub rubber shock absorber

running great at idle but i do miss the flat spot elimination.

not gonna bother changing it back
and the next sprocket i have in the toolbox is a 15t so.. this summer will be stock riding all the way.

Something tells me i shouldn't have messed with a good thing. haha

Ill see how it goes and see if i can keep my hands off the shim mod.
Canuck is offline  
Reply With Quote
Old 03-23-2009, 09:41 AM   #29
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: Needle shim modification

Quote:
Originally Posted by Canuck
and the next sprocket i have in the toolbox is a 15t so.. this summer will be stock riding all the way.
Have you decided that you don't like the 16T......or are you just cheap? :biggrin:
__________________
Loud pipes risk rights!
Easy Rider is offline  
Reply With Quote
Old 03-23-2009, 01:45 PM   #30
Canuck
Senior Member
 
Join Date: Aug 2008
Location: Vancouver Island
Posts: 159
Re: Needle shim modification

hahahah no not cheap Easy.

I always think back to Pacific Motorcycle schools fleet of GZ's

I know most motorcycle schools obviously have the know how on what to do with a GZ to keep it running optimal. Lesson after lesson those bikes have to be near perfect.

My GZ does not ride like the GZ i rode back then.

I know it is my own fault. 90 bucks an hour at the shop just doesn't suit my budget when something goes wrong everytime. Perhaps frugality does play a factor in what happens to the bike. I try my best with the greatest of intentions for the bike. Obviously somewhere along the line Ive neglected the wrong problem(s).

I just know that those bikes had a 15tooth and were well maintained or pulled off the lineup if faulty. Mark was a 5 time super bike champion who has his own Q and A on the schools website. I am sure his decisions were best among anyone I have met or discussed the GZ with. However he is a busy man whom i do not want to bother on a constant basis when i have problems. Opening to a variety of people who have shared my beginner status and are on the same level if not a few tiers higher seems more plausible and to also allow others to read a learn from my mistakes and what led to a solution seems beneficial.

I want the bike the way that school ran theirs if not closer to it. I liked the 16tooth with the Shim Mod.
But I THINK you can get a similar ride that was originally designed for the bike ( by the engineers who built it) without wondering if your screwing the bike up in the long run.

Maybe there is a reason the GZ has been unchanged and unmodified from 99-present....
Canuck is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.