click when let out the clutch at low throttle - Page 2

5th_bike · 04-18-2009, 11:29 PM

Quote:

Originally Posted by dannylightning

quick question about the rear axle nuts after tensioning the chain, it says you want about 50 lbs of torque [...] does that sound about right

Yes, the book says 78 Nm, that's about 56 lbs.

Water Warrior 2 · 04-19-2009, 01:53 AM

A half inch drive should be more than adequate with a strong arm or 2.

dannylightning · 04-30-2009, 05:55 PM

i guess i should mention, i found out what the problem was. sometimes i was barley tapping the gear shifter up and it was not quite changing gears. i was paying attention to what i was doing and did not hear it click when i shifted but when i let the clutch out and that clicked it in to gear.

i started hitting the gear shifter just a little harder to where i would hear it click and it has not happened since.

04-19-2009, 01:53 AM	#12
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: click when let out the clutch at low throttle A half inch drive should be more than adequate with a strong arm or 2.
	0

04-30-2009, 05:55 PM	#13
dannylightning Senior Member Join Date: Apr 2009 Location: akron ohio Posts: 893	Re: click when let out the clutch at low throttle i guess i should mention, i found out what the problem was. sometimes i was barley tapping the gear shifter up and it was not quite changing gears. i was paying attention to what i was doing and did not hear it click when i shifted but when i let the clutch out and that clicked it in to gear. i started hitting the gear shifter just a little harder to where i would hear it click and it has not happened since. Login or Register to Remove Ads
	0