![]() |
#11 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: Handle Bars
There are lots of 7/8 bars in different heights and styles to suit your preference.I would not touch them adapters with a ten foot pole.Also as mentioned you still need to change all the controls.
:cool: ![]() Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#12 |
Member
Join Date: Feb 2011
Location: Virginia Beach, VA.
Posts: 79
|
Re: Handle Bars
Now that I know about the bars being 7/8" I have done a search for those and found a TON of bars for the correct size, which is exactly what I was looking for.
Now can anyone recommend a decent width for the bars to go with on a bobber style? I don't know if the 28" is to long, to short, or will it cause clearence issues until I get a different tank? ![]() |
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: Handle Bars
The way to find out which bars are right for you is to sit on the bike, close your eyes, hold out your arms until you feel comfortable,then open your eyes & see where your hands are in relation to your current bars. That way you'll be able to see how much difference you need. There are no hard & fast rules. It all depends on your individual size. :2tup:
__________________
By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: Handle Bars
Go to Flanders Handlebars for info on bar measurements. Look up the GZ first and then compare other bar dimensions. There is a very good chart and info explaining dimensions. You don't have to buy from them but you can use the info to look for what you want.
|
![]() |
![]() |
![]() |
#15 |
Member
Join Date: Feb 2011
Location: Virginia Beach, VA.
Posts: 79
|
Re: Handle Bars
For the most part the bars I have been looking at are consitantly 28.5" wide so as long as I am not having clearance issues I will most likely be going with those.
Here is an image to the one's I am specifically looking at. ![]() Available from http://cgi.ebay.com/ebaymotors/Dragb...item335f401724 Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#16 |
Super Moderator
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
|
Re: Handle Bars
Look up Superbike handleabrars in 7/8"
That should fit the style your looking at while not being too drastic. |
![]() |
![]() |
![]() |
#17 |
Member
Join Date: Jun 2010
Location: Myrtle Beach, SC
Posts: 52
|
Re: Handle Bars
I just wanted to confirm these would fit our gz250? it says 7/8". If anyone could advise that would be greatly appreciated. Thank you!
http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT |
![]() |
![]() |
![]() |
#18 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: Handle Bars
Can't see a problem. The ad says 7/8", and that's what the geezer bars are. BTW, nice looking grips. :2tup:
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
![]() |
![]() |
![]() |
#19 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: Handle Bars
Quote:
![]() |
|
![]() |
![]() |
![]() |
#20 |
Member
Join Date: Jun 2010
Location: Myrtle Beach, SC
Posts: 52
|
Re: Handle Bars
Hey Blaine,
Did the grips feel larger? |
![]() |
![]() |
![]() |
|
|