Larger Front Tire (and raise the front Fender) - Page 2

mike250 · 03-20-2015, 06:42 PM

I know this is an old thread, but I'm hoping someone can help me. I searched for the how-to write-up for the larger rear tire and couldn't find it. Would anyone care to share the link to it please?

DAN · 12-10-2015, 06:32 PM

Quote:

Originally Posted by mike250

I know this is an old thread, but I'm hoping someone can help me. I searched for the how-to write-up for the larger rear tire and couldn't find it. Would anyone care to share the link to it please?

Posted under Blaine, April 29th 2010

blaine · 12-10-2015, 06:34 PM

http://www.gz250bike.com/forum/showthread.php?t=3150

spldart · 04-28-2016, 08:50 PM

I'm liking the looks of this mod.
Would a Shinko 250 Front MT90-16 fit the bill?

spldart · 05-05-2016, 11:54 PM

Never mind. Mod finished and looks good. Pics this weekend.
Oversized front and rear..... I'm looking PHAT!

spldart · 05-06-2016, 08:36 PM

Very phat! Fills the fender nicely

Now I'm wondering how much modification I'd have to do to go from the oversize 140/90
in the rear to a 150/90

Vegas Street Rider · 05-07-2016, 08:56 PM

Did you raise the front fender Spldart? What size front and rear did you end up going with? Looks like a big boy bike. I like it. I see where you went with a 140/90 on the rear. Should have read more carefully.

spldart · 05-07-2016, 09:04 PM

I went with a 1 inch rise on the front fender as to the experienced advice of this threads author.

Oh and I used a dremel to make the new mounting holes. It would be easy to slip a drill and break the plastic fender. Otherwise measure and mark twice so as to dremel once.
The mod was easy.
I don't see any reason to fear doing it.
The only issue, if you can call it that, is you have an unused set of holes in the fender. But they aren't very visible.
I highly recommend.
Ride is good and it feels more stable leaned over.
In fact. You can feel the added height more in hard cornering. I used to scrape pegs occasionally. Now I don't.
And to me. JMHO. The oversized front and rear make the bike feel more sure footed.

spldart · 05-07-2016, 09:05 PM

But that's Just My Humble Opinion.

spldart · 05-07-2016, 09:12 PM

Oh. And lastly....
A friend looked at the 130 front and the 140 rear and said.
"The front looks great but the rear isn't big enough"
I kinda agree. The 140 rear isn't 'bigger' enough over the 130 front.
I'm gonna look into modding a 150 rear... 'read' figure how to clearance it.

03-20-2015, 06:42 PM	#11
mike250 Junior Member Join Date: Mar 2015 Posts: 2	I know this is an old thread, but I'm hoping someone can help me. I searched for the how-to write-up for the larger rear tire and couldn't find it. Would anyone care to share the link to it please? Login or Register to Remove Ads
	0

12-10-2015, 06:34 PM	#13
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	http://www.gz250bike.com/forum/showthread.php?t=3150 __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads Last edited by blaine; 12-10-2015 at 06:37 PM.
	0

05-05-2016, 11:54 PM	#15
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	Never mind. Mod finished and looks good. Pics this weekend. Oversized front and rear..... I'm looking PHAT! Login or Register to Remove Ads
	0

04-28-2016, 08:50 PM	#14
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	I'm liking the looks of this mod. Would a Shinko 250 Front MT90-16 fit the bill?
	0

05-07-2016, 08:56 PM	#17
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,107	Did you raise the front fender Spldart? What size front and rear did you end up going with? Looks like a big boy bike. I like it. I see where you went with a 140/90 on the rear. Should have read more carefully.
	0

05-07-2016, 09:04 PM	#18
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	I went with a 1 inch rise on the front fender as to the experienced advice of this threads author. Oh and I used a dremel to make the new mounting holes. It would be easy to slip a drill and break the plastic fender. Otherwise measure and mark twice so as to dremel once. The mod was easy. I don't see any reason to fear doing it. The only issue, if you can call it that, is you have an unused set of holes in the fender. But they aren't very visible. I highly recommend. Ride is good and it feels more stable leaned over. In fact. You can feel the added height more in hard cornering. I used to scrape pegs occasionally. Now I don't. And to me. JMHO. The oversized front and rear make the bike feel more sure footed.
	0

05-07-2016, 09:05 PM	#19
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	But that's Just My Humble Opinion.
	0

05-07-2016, 09:12 PM	#20
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	Oh. And lastly.... A friend looked at the 130 front and the 140 rear and said. "The front looks great but the rear isn't big enough" I kinda agree. The 140 rear isn't 'bigger' enough over the 130 front. I'm gonna look into modding a 150 rear... 'read' figure how to clearance it.
	0