Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > General Motorcycle-Related > Other Models/Manufacturers

Reply
 
Thread Tools Display Modes
Old 05-20-2012, 02:31 PM   #11
mrlmd1
Senior Member
 
Join Date: Jan 2008
Location: Crawfordville, Florida
Posts: 2,853
Re: 1999 Suzuki Marauder vz800 Starter issue

Check yourr battery voltage at rest - you should have at least 12.6-12.8V for a fully charged good battery. The combination of low battery voltage, dirty/corroded connections at the battery or inside the solenoid (from low voltage sparking) could give you the intermittent starts you are seeing.



Login or Register to Remove Ads
mrlmd1 is offline  
Reply With Quote
Old 05-20-2012, 04:47 PM   #12
dentheman
Senior Member
 
Join Date: Apr 2010
Location: Lubbock, TX
Posts: 629
Re: 1999 Suzuki Marauder vz800 Starter issue

Most (all?) bikes have the clutch switch located where the clutch lever attaches to the grip, look for wires coming out of the grip area.
__________________
2007 Shadow Spirit 750
dentheman is offline  
Reply With Quote
Old 05-20-2012, 09:39 PM   #13
mithuth
Member
 
Join Date: May 2012
Location: Warren, PA
Posts: 43
Re: 1999 Suzuki Marauder vz800 Starter issue

Quote:
Originally Posted by mrlmd1
Check yourr battery voltage at rest - you should have at least 12.6-12.8V for a fully charged good battery. The combination of low battery voltage, dirty/corroded connections at the battery or inside the solenoid (from low voltage sparking) could give you the intermittent starts you are seeing.
I did think to check the battery this morning. 13.17off/ 14.3 running according to mr volt-o-meter.

I ordered a new starter solenoid tonight and will get a new relay tomorrow when I go pick up new oil and filter at the local dealer. It can't hurt to replace 10 year old electronics, especially if the previous owner was starting/running it on a dead/near dead battery.

I giggled after thinking about the clutch switch. I guess it's one of those things I never really thought about, but kind of knew was there since it reads the clutch position for starting purposes.
Kill switch, kick stand switch and clutch switch seem good and working properly. It's gotta be starter solenoid, relay, or the starter itself.
__________________
-Jason
2001 gz250
1999 vz800 Marauder



Login or Register to Remove Ads
mithuth is offline  
Reply With Quote
Old 05-21-2012, 05:30 AM   #14
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
Re: 1999 Suzuki Marauder vz800 Starter issue

Quote:
Originally Posted by mithuth

I ordered a new starter solenoid tonight and will get a new relay tomorrow It's gotta be starter solenoid, relay, or the starter itself.
Hate to tell you, but solenoid & relay are two different words for the same thing. Seems like you don't have much electrical knowledge, plus, you aren't listening to our replies. If you carry on guessing, you may, by chance, stumble upon the correct solution, but I fear that it's going to be an expensive learning curve, if you continue to swap parts willie nillie, without testing to find out exactly which part is faulty. After spending vast amounts of money, you may still find that it's something as simple as a loose connection that you've missed.
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Old 05-21-2012, 09:09 AM   #15
mithuth
Member
 
Join Date: May 2012
Location: Warren, PA
Posts: 43
Re: 1999 Suzuki Marauder vz800 Starter issue

The starter relay is mounted behind (towards the rear of) the stater solenoid. I'll get you a picture. They are two separate parts.
After looking at both, they do not appear to come apart where I can get inside to check/clean them. Replacing them for only $20 is a cheap way to completely eliminate that as an issue. Money well spent in my opinion. I was reading on here that some other countries charge upwards of $90 for a relay, maybe this is where you think I'm over spending?

I cleaned and checked all connections at the battery, at the solenoid, and at the starter itself. I added dielectric grease to prevent any future corrosion. All connections were clean and shiny. I took a small file and gently sanded all contacts to be sure no film/corrosion had built up to cause faulty connections.

I AM listening to suggestions, and so far everything has checked out that was suggested. Is there something you feel I've overlooked?

As for my experience, I haven't rewired a house or anything that vast but I've completed a circuit or two in my day.
__________________
-Jason
2001 gz250
1999 vz800 Marauder



Login or Register to Remove Ads
mithuth is offline  
Reply With Quote
Old 05-21-2012, 09:11 AM   #16
mithuth
Member
 
Join Date: May 2012
Location: Warren, PA
Posts: 43
Re: 1999 Suzuki Marauder vz800 Starter issue

Two separate parts.

Starter relay



Starter solenoid
__________________
-Jason
2001 gz250
1999 vz800 Marauder
mithuth is offline  
Reply With Quote
Old 05-21-2012, 11:48 AM   #17
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
Re: 1999 Suzuki Marauder vz800 Starter issue

A much cheaper way is to use a meter. That way, if you use the resistance setting across the heavy duty contacts of the solenoid, while applying 12v to the coil,you may save $20. What I'm getting at, is that it's no use guessing at what MAY be faulty. A methodical test is the only way to go.
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Old 05-21-2012, 12:04 PM   #18
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
Re: 1999 Suzuki Marauder vz800 Starter issue

[attachment=1:32gvok0r]img071.jpg[/attachment:32gvok0r]BTW, something weird here. Like I said, it's the same thing. Even the parts drawing shows it as one unit. I include a drawing of the starter circuit.
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Old 05-21-2012, 02:09 PM   #19
dentheman
Senior Member
 
Join Date: Apr 2010
Location: Lubbock, TX
Posts: 629
Re: 1999 Suzuki Marauder vz800 Starter issue

Quote:
Originally Posted by mithuth
Two separate parts.

Starter relay



Starter solenoid
The top photo does not look like a motorcycle starter relay to me. The bottom one does. And why would there be TWO?

Did you buy this bike new?
__________________
2007 Shadow Spirit 750
dentheman is offline  
Reply With Quote
Old 05-21-2012, 03:44 PM   #20
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
Re: 1999 Suzuki Marauder vz800 Starter issue

Quote:
Originally Posted by dentheman
The top photo does not look like a motorcycle starter relay to me. The bottom one does. And why would there be TWO?
Thanks for confirming what I've been trying to get over to this guy. :2tup:
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:43 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.