Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > General > Member Introductions

Reply
 
Thread Tools Display Modes
Old 01-13-2014, 10:49 PM   #11
5th_bike
Senior Member
 
5th_bike's Avatar
 
Join Date: Oct 2007
Location: HoCo, Maryland
Posts: 1,349
It won't start when it's in gear. If you get the starter running, it should start.
__________________
2005 "Saturn Black", stock + tach



Login or Register to Remove Ads
5th_bike is offline  
Reply With Quote
Old 01-13-2014, 11:04 PM   #12
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
The bike has a side stand switch that prevents the bike from starting and running if the tranny is in gear. It must be in neutral or have the side stand up if in gear. WORD of WARNING!!! Do not jump from a running vehicle. The charging system of almost anything on 4 wheels will fry the GZ electrical system. The GZ will easily draw enough power from a 4 wheeler battery with the engine off. Keep in mind to put the fuel cock in the prime position for a few seconds in case the carb is dry. After that put it in the run position.
Water Warrior 2 is offline  
Reply With Quote
Old 01-14-2014, 05:28 AM   #13
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
I noticed that you said that the petcock was in the off position. There is no "off" position on the GZ petcock, so unless it's been swapped for some reason, the stock petcock has three positions. Run, Prime, Reserve. In run, engine vacuum opens the petcock, and shuts when the engine is switched off. (so you leave it in run, all the time) Prime lets fuel flow freely to the carb, so should only be used when starting a bike with a dry carb (then switched to run when the bike is running) reserve pulls fuel into a pipe that is shorter than run/prime, so lets you know when you need to fill up quickly.

You say that the carb is clean, but the carb is the achilles heel of the GZ, so you, at least, need to run carb cleaner (mixed into the fuel tank) every 3 or 4 tankfulls.
__________________
By birth an Englishman, by the grace of God a Yorkshireman.



Login or Register to Remove Ads
alantf is offline  
Reply With Quote
Old 01-14-2014, 12:31 PM   #14
TexasCam
Junior Member
 
Join Date: Jan 2014
Posts: 7
Quote:
Originally Posted by alantf View Post
I noticed that you said that the petcock was in the off position. There is no "off" position on the GZ petcock, so unless it's been swapped for some reason, the stock petcock has three positions. Run, Prime, Reserve. In run, engine vacuum opens the petcock, and shuts when the engine is switched off. (so you leave it in run, all the time) Prime lets fuel flow freely to the carb, so should only be used when starting a bike with a dry carb (then switched to run when the bike is running) reserve pulls fuel into a pipe that is shorter than run/prime, so lets you know when you need to fill up quickly.

You say that the carb is clean, but the carb is the achilles heel of the GZ, so you, at least, need to run carb cleaner (mixed into the fuel tank) every 3 or 4 tankfulls.
I've only seen the bike in person once so far, so I'll keep that in mind! Thanks for the info!
TexasCam is offline  
Reply With Quote
Old 01-14-2014, 12:40 PM   #15
Cathy
Senior Member
 
Cathy's Avatar
 
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
Tell us how it goes. :3



Login or Register to Remove Ads
Cathy is offline  
Reply With Quote
Old 01-15-2014, 10:25 AM   #16
Goose51683
Senior Member
 
Goose51683's Avatar
 
Join Date: Apr 2013
Location: Indiana
Posts: 621
TexasCam- I was reading through the earlier post in this thread and you mentioned idling your truck while jumping the bike. I've always been told to shut your vehicle off entirely and then jump the bike. I think the concern is that running your vehicle can produce more power than the bikes electrical system can handle.

I'm not sure how big of an issue this is but I wanted to mention it for future reference.
Goose51683 is offline  
Reply With Quote
Old 01-15-2014, 12:53 PM   #17
alantf
Senior Member
 
alantf's Avatar
 
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
Yes, it is a BIG issue. The problem is that if the car engine is running, the alternator that is charging the car battery is putting out such a high rate of charge that it can (will!) fry a puny bike battery. A bike battery will need a maximum of 2A to charge without problems, while theGZ battery (6AH) is happiest at 0.6A charge, so it's the charging system of the donor vehicle that will do the damage.
__________________
By birth an Englishman, by the grace of God a Yorkshireman.
alantf is offline  
Reply With Quote
Old 01-15-2014, 02:51 PM   #18
Goose51683
Senior Member
 
Goose51683's Avatar
 
Join Date: Apr 2013
Location: Indiana
Posts: 621
Thanks for the clarification Alan.
Goose51683 is offline  
Reply With Quote
Old 01-16-2014, 04:03 PM   #19
TexasCam
Junior Member
 
Join Date: Jan 2014
Posts: 7
Duly noted, gentlemen! This is my first non kick-start bike so you'll have to bear with me.
TexasCam is offline  
Reply With Quote
Old 01-16-2014, 05:12 PM   #20
Goose51683
Senior Member
 
Goose51683's Avatar
 
Join Date: Apr 2013
Location: Indiana
Posts: 621
not a problem, we all have things to learn
Goose51683 is offline  
Reply With Quote
Reply



Tags
new guy


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.