Making a Cafe Racer.

[Wigginton49]

Thanks so much guys. I'll post the pictures as i get everything put together. Until then any helpful suggestions would be welcomed

[mrlmd1]

This is just my opinion but in my mind that minimalist seat looks terribly uncomfortable for a long ride and I think you would be sliding all over the place especially if you raised the rear end. It would be good if you can find a bike with a seat like that and sit on it first before buying it and then not being happy with it, but if it's just the look you want, then go for it.

[Wigginton49]

I thought about that too. I figure if it is too uncomfortable i cold just beef up the seat or use maybe use the rear seat from the gz and as far as sliding around goes wouldn't it be riding any other bike with a "standard" style.?

[Wigginton49]

I'm looking at rear shocks right now. The stock shocks are 12 1/2" correct? Would 14" shocks be too much?

[blaine]

Originally Posted by Wigginton49

I'm looking at rear shocks right now. The stock shocks are 12 1/2" correct? Would 14" shocks be too much?

They should be fine.You can always run them on the softest setting if you like.
:cool:

[Skunkhome]

I am thinking that the frame really does not lend itself to being turned into a real cafe racer. You can memick the look somewhat but it is hard to negate that down in the middle cruiser shape.

[Wigginton49]

Guys i appreciate your comments but what i really need is suggestion and helpful tips. Negative comments don't really help the process.

[mrlmd1]

You are asking for advice and that's what you are getting. Some of it you may not like, that's up to you. Search on here for other cafe's done and take a clue from what you see.

[Water Warrior 2]

Negative comments will let you see both sides of the coin. The final decision is up to you.

[mrlmd1]

The comments aren't so much negative, they're positive advice. or valid opinions. Your choice.