Baron Engine Guard????? - Page 2

alantf · 12-22-2010, 03:35 PM

Quote:

Originally Posted by Water Warrior

There aren't that many bars for the GZ so anything that we find is a bonus.

This is from the SPAAN catalogue.[attachment=0:btb0f92w]Untitled-1.jpg[/attachment:btb0f92w]

Water Warrior 2 · 12-22-2010, 06:21 PM

Nice stuff Alantf but too bad it would cost so much to import the stuff. Oh wait, is that stuff available in Britain ? I have heard that moto parts from Britain can be relatively cheap when imported to the U.S. and Canada.

alantf · 12-23-2010, 10:46 AM

Try googleing amazon.com > motorcycle & ATV equipment. You might be pleasantly surprised by what they're selling occasionally, & they seem to have decent prices. For instance, the leather jacket that I bought over here - I checked amazon last week, & they were selling the exact same jacket for little more than half what I paid.( plus delivery to Spain is now free for orders over £25) :2tup:

HumbleNewRider · 07-15-2012, 10:41 PM

Thanks for posting these pictures and the link to the Baron engine guard. I was concerned about the MC Enterprise engine guard, as I had seen in another post that it interferred with the brake lever. I know the GZ use to have a really high brake lever but on the 2008 model I bought the lever is in a lower, closer to horizontal, position. So, I was particular concerned about that problem. I'll order the Baron. (I liked the size look of the SPAAN engine guard, but didn't find those during my Internet search.)

dentheman · 07-16-2012, 12:55 AM

Quote:

Originally Posted by HumbleNewRider

Thanks for posting these pictures and the link to the Baron engine guard. I was concerned about the MC Enterprise engine guard, as I had seen in another post that it interferred with the brake lever. I know the GZ use to have a really high brake lever but on the 2008 model I bought the lever is in a lower, closer to horizontal, position. So, I was particular concerned about that problem. I'll order the Baron. (I liked the size look of the SPAAN engine guard, but didn't find those during my Internet search.)

You should be able to adjust brake lever heighth.

Water Warrior 2 · 07-16-2012, 03:57 AM

Oh my, I'd forgotten about the Baron bars. Yup they look like they will suit larger hooves on a GZ rider. As mentioned, the brake pedal is adjustable so you shouldn't have any problems overall. Keep in mind after you adjust the pedal height you should check for the brake light function too. The rear brake light switch is easily adjusted and it is found just to the rear of the pedal itself.

alantf · 07-16-2012, 05:23 AM

For some reason, ALL GZs come from the factory with the brake lever set far too high (and not even set to Suzuki's own spec). You should adjust it so that in a comfortable riding position, your foot is slightly ABOVE it. That way, when you go for the rear brake, you can push down straight away, and not need to move your foot to bring it above the pedal. While you're at it, check that the gear shift pedal is in a comfortable position. That, also, may need adjusting. :2tup:

HumbleNewRider · 07-16-2012, 06:20 AM

"ALL GZs come from the factory with the brake lever set far too high"

I just thought the older models (like I rode in the MSF class) had poorly designed brake levers. As you said, you have to really lift your foot up high to get on the brake. Not good for fast braking! I guess the 2008 model I bought used had just been adjusted to a safe position. I thought Suzuki just modified / improved the lever.

I avoided the MC Enterprise engine guard; because, I thought I'd have to adjust the brakelever to that awkward position to avoid interfering with the engine guard.

alantf · 07-16-2012, 10:53 AM

Quote:

Originally Posted by HumbleNewRider

I just thought the older models (like I rode in the MSF class) had poorly designed brake levers. As you said, you have to really lift your foot up high to get on the brake.

This really shocks me. I would have thought that these so called experts, who are paid to teach novice riders, would have made sure that the controls were set up properly, to at least a position that would suit the average rider. :??:

HumbleNewRider · 07-17-2012, 06:17 AM

Alantf --- they told me that all Suzuki's have really high brake levers. I just believed them. They had about 1/2 dozen GZ250s for the class. Brake lever was the same on all of them.

Oh! I want to say thanks for a post you made (I'm not sure when, maybe a few years ago) stating an engine guard's real value is protecting the rider.

Until reading that, I had considered "maybe" getting an engine guard for the bigger bike. But, your post was enough to convince me I need to suck it up and pay the $200 per bike for "crash guards" for both of them. My 17 year old son has just started riding --- and I'm essentially a new rider, haven't not ridden in decades (and not knowing all that much when I did ride). Trying to do it as safely as possible this time around.

Good advice!

12-22-2010, 06:21 PM	#12
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Baron Engine Guard????? Nice stuff Alantf but too bad it would cost so much to import the stuff. Oh wait, is that stuff available in Britain ? I have heard that moto parts from Britain can be relatively cheap when imported to the U.S. and Canada.
	0

12-23-2010, 10:46 AM	#13
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: Baron Engine Guard????? Try googleing amazon.com > motorcycle & ATV equipment. You might be pleasantly surprised by what they're selling occasionally, & they seem to have decent prices. For instance, the leather jacket that I bought over here - I checked amazon last week, & they were selling the exact same jacket for little more than half what I paid.( plus delivery to Spain is now free for orders over £25) :2tup: __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

07-15-2012, 10:41 PM	#14
HumbleNewRider Junior Member Join Date: Jul 2012 Location: Fort Worth, Texas Posts: 27	Re: Baron Engine Guard????? Thanks for posting these pictures and the link to the Baron engine guard. I was concerned about the MC Enterprise engine guard, as I had seen in another post that it interferred with the brake lever. I know the GZ use to have a really high brake lever but on the 2008 model I bought the lever is in a lower, closer to horizontal, position. So, I was particular concerned about that problem. I'll order the Baron. (I liked the size look of the SPAAN engine guard, but didn't find those during my Internet search.)
	0

07-16-2012, 03:57 AM	#16
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Baron Engine Guard????? Oh my, I'd forgotten about the Baron bars. Yup they look like they will suit larger hooves on a GZ rider. As mentioned, the brake pedal is adjustable so you shouldn't have any problems overall. Keep in mind after you adjust the pedal height you should check for the brake light function too. The rear brake light switch is easily adjusted and it is found just to the rear of the pedal itself.
	0

07-16-2012, 05:23 AM	#17
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: Baron Engine Guard????? For some reason, ALL GZs come from the factory with the brake lever set far too high (and not even set to Suzuki's own spec). You should adjust it so that in a comfortable riding position, your foot is slightly ABOVE it. That way, when you go for the rear brake, you can push down straight away, and not need to move your foot to bring it above the pedal. While you're at it, check that the gear shift pedal is in a comfortable position. That, also, may need adjusting. :2tup: __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

07-16-2012, 06:20 AM	#18
HumbleNewRider Junior Member Join Date: Jul 2012 Location: Fort Worth, Texas Posts: 27	Re: Baron Engine Guard????? "ALL GZs come from the factory with the brake lever set far too high" I just thought the older models (like I rode in the MSF class) had poorly designed brake levers. As you said, you have to really lift your foot up high to get on the brake. Not good for fast braking! I guess the 2008 model I bought used had just been adjusted to a safe position. I thought Suzuki just modified / improved the lever. I avoided the MC Enterprise engine guard; because, I thought I'd have to adjust the brakelever to that awkward position to avoid interfering with the engine guard.
	0

07-17-2012, 06:17 AM	#20
HumbleNewRider Junior Member Join Date: Jul 2012 Location: Fort Worth, Texas Posts: 27	Re: Baron Engine Guard????? Alantf --- they told me that all Suzuki's have really high brake levers. I just believed them. They had about 1/2 dozen GZ250s for the class. Brake lever was the same on all of them. Oh! I want to say thanks for a post you made (I'm not sure when, maybe a few years ago) stating an engine guard's real value is protecting the rider. Until reading that, I had considered "maybe" getting an engine guard for the bigger bike. But, your post was enough to convince me I need to suck it up and pay the $200 per bike for "crash guards" for both of them. My 17 year old son has just started riding --- and I'm essentially a new rider, haven't not ridden in decades (and not knowing all that much when I did ride). Trying to do it as safely as possible this time around. Good advice!
	0