04-04-2024, 03:33 PM
|
#1 |
|
Junior Member
Join Date: Apr 2024
Location: Austin, TX
Posts: 1
|
Clutch Not Engaging
Hello,
I was riding and my clutch cable snapped. I was able to limp home by shifting w/o clutch. Wondering if I did further damage. Replaced the cable yesterday but the clutch lever is just moving freely and not "springing" back. Do I have to do a clutch rebuild or is there maybe just a spring that is not properly mounted? Any help is appreciated! -Radam Login or Register to Remove Ads |
|
|
|
04-05-2024, 12:18 AM
|
#2 |
|
Administrator
Join Date: Nov 2013
Location: New York
Posts: 48
|
You most likely didn't do any damage, I rarely use a clutch when riding any bike/ATV once moving. I don't own a GZ250, but there's probably a spring missing or the shaft isn't correctly positioned inside.
|
|
|
|
08-20-2024, 11:20 PM
|
#3 |
|
Junior Member
Join Date: Aug 2024
Posts: 4
|
You likely didn't do any damage, did you take the clutch arm off of the splines for the clutch release shaft? It could be that you didn't line the splines for the shaft and the clutch arm correctly. It's an easy mistake to make
Login or Register to Remove Ads |
|
|
|
 |
| Tags |
| clutch |
|
|
Linear Mode
