Relocate choke knob to carb

Deckerator · 10-09-2020, 01:00 AM

Anyone have any good recommendations for a simple push pull knob i can just screw into the carb and eliminate the cable and handlebar choke slider?
Much appreciated!!

raddad70 · 11-03-2020, 09:01 PM

I did it on my bike. The cable was rusty and frozen at the lever. I removed the entire cable cleaned up all the pieces going into the carb- spring, plunger and housing. I cut the cable maybe 2 inches added a small ferrel where the cable would be inserted and crimped on a small ring terminal then a key ring onto that. Makes it easy to pull. Very simple and works great but you do have to physically hold it open until it warms up. No more than a minute or two. No pictures are uploading for some reason

10-09-2020, 01:00 AM	#1
Deckerator Junior Member Join Date: Jul 2020 Location: Nashville Posts: 7	Relocate choke knob to carb Anyone have any good recommendations for a simple push pull knob i can just screw into the carb and eliminate the cable and handlebar choke slider? Much appreciated!! Login or Register to Remove Ads
	0

11-03-2020, 09:01 PM	#2
raddad70 Junior Member Join Date: May 2020 Posts: 23	I did it on my bike. The cable was rusty and frozen at the lever. I removed the entire cable cleaned up all the pieces going into the carb- spring, plunger and housing. I cut the cable maybe 2 inches added a small ferrel where the cable would be inserted and crimped on a small ring terminal then a key ring onto that. Makes it easy to pull. Very simple and works great but you do have to physically hold it open until it warms up. No more than a minute or two. No pictures are uploading for some reason
	0