My GZ got new shoes and upgrades

derbydave · 03-17-2018, 11:43 PM

I had a GZ work day today. The bike got new Shinko SR 734/ 735 tires, Well just the rear so far. The tube for the front didn't arrive in time. I also installed a sissy bar (For when my kids are ready to ride with me) and installed a 16 tooth front sprocket. The original 15 tooth one was getting worn and much to my surprise when I went to take the nut off it was just barely finger tight

I'm glad I was in there changing it and found the loose bolt. It was late when I finished so the test ride is going to have to wait. I'm hoping the 16 tooth is all everyone says it is.

derbydave · 03-19-2018, 11:53 AM

I took the GZ out for a short ride yesterday to test the new 16 tooth sprocket. I can't tell much of a difference in acceleration but it does noticeably lower the engine RPMs at cruising speed. It felt like it could achieve 60 MPH easier without feeling as stressed. As far as hills go that is pretty much a non issue since I am in Kansas.

03-19-2018, 11:53 AM	#2
derbydave Senior Member Join Date: Jan 2017 Location: KS Posts: 103	I took the GZ out for a short ride yesterday to test the new 16 tooth sprocket. I can't tell much of a difference in acceleration but it does noticeably lower the engine RPMs at cruising speed. It felt like it could achieve 60 MPH easier without feeling as stressed. As far as hills go that is pretty much a non issue since I am in Kansas. __________________ 2003 Suzuki GZ250 (Sold) 1986 Suzuki Cavalcade LXE 1986 Suzuki Intruder VS700
	2