whats needed to switch to led turn signals

[anruari]

okay i wanna swap out those big old ugly indicators for some smaller tidier led ones..

is there anything else i need to change in order to do this apart from the indicators themselves?

thanks..

[Water Warrior 2]

That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.

[blaine]

Originally Posted by Water Warrior 2

That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.

If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)

[Water Warrior 2]

Originally Posted by blaine

If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)

Thanks Blaine.

[anruari]

Originally Posted by Water Warrior 2

That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.

okay erm where in the bike would i locate the flasher and then what do i do to hook and electronic one up?

think noob..

[blaine]

Originally Posted by anruari

okay erm where in the bike would i locate the flasher and then what do i do to hook and electronic one up?

think noob..

I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.

[anruari]

Originally Posted by blaine

I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.

okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?

[blaine]

Originally Posted by anruari

okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?

Nope fore brake light/tail light just change to a LED bulb..(1157)